- Whole welded structure
- Good sealing performance
- Zero-point stability
- Small power consumption
- Simple and reliable, no moving parts inside; virtually no pressure loss
- Low-frequency square-wave
- Anti-jamming performance
- User friendly, easy maintenance
- SPAN approved product
| Diameter: | DN25 / DN32 / DN40 / DN50 / DN65 / DN80 / DN100 |
| Electrode: | Hastelloy C / SS316L / Hb / Ti / Pt / Ta |
| Liner: | PTFE |
| Body: | Carbon steel |
| Medium: | Conductive liquids |
| Conductivity: | ≥ 5μs/cm / Softened water ≥ 20μs/cm |
| Accuracy: | ±0.5% R.S |
| Operating temperature: | -20 to 80˚C (Compact); -20 to 120˚C (Remote) |
| Operating pressure: | Max 10 bar |
| Protection class: | IP67 (compact) / IP68 (remote) |
| Output: | 4-20mA / Frequency / Pulse output signal |
| Communication: | RS485 Modbus / HART (as option) |
| Power supply: | 220V AC / 24V DC |
| Connection: | DIN wafer to suit PN10 |
| Installation type: | Vertical / Horizontal with full-bore flow condition |
| Converter type: | Compact type (integral sensor) / Remote type (Non-attached sensor) |
| Cable length: | Remote converter with 10 meters cable (standard) |
The JA series electromagnetic flowmeter consists of grounding electrode where grouding rings is not required. It can be used to accurately measure the flowrate of liquid-solid two phase fluids, such as sewage, paper pulp, slurry and mineral slurry which has an electrical conductivity greater than 5 μS/cm. This type of flowmeter is practically unaffected by variation in temperature, viscosity, pressure and density. There is no pressure loss and no moving parts which will not cause additional energy losses or trapped with solid waste. With bi-directional feature, the flow indication and totalization in both directions is standard.
A compact design integrates the converter and flow sensor while remote type comprises of remote mounted converter and flow sensor connecting with signal cable.
