- Product registered with SPAN
- Product options: 10m sensor only; Meter only; Meter + 10m sensor
- Panel mounted microprocessor
- Auto temperature compensation
- Relay output contact
- High luminous 7-segment
- Auto cleaning control function
- Isolated 4-20mA DC output
- User friendly, easy maintenance
| Range: | 0 to 2000 μS/cm |
| Pressure limitation: | Max 3 bar |
| Channel: | Single channel |
| 3 contact output: | High, Low & Cleaning contact |
| Signal output: | Isolated 4-20mA DC |
| Power supply: | 220V AC 50/60Hz, 3VA |
| Display: | LED display with backlighted |
| Key pad: | Membrane keypad 4 buttons |
| Operating temperature: | 0 to 60°C |
| Accuracy: | ±1% of F.S. |
| Enclosure: | ABS / IP65 |
| Dimension: | 96 (W) x 96 (H) x 125 (D)mm – DIN96 |
| Sensor material: | SS 316L (20-2000μS/cm) / PSU (20000 μS/cm) |
| Sensor range: | 1) C001 = 20 μS/cm 2) C01 = 200 μS/cm 3) C1 = 2000 μS/cm 4) C10 = 20000 μS/cm |
The DWA-2000A microprocessor based Conductivity controller is designed to serve the purpose of an efficient operation of wide area water supply system as well as elimination of its repair and renovation work. The controller capable or reading and transmitting data received directly from a meaurement sensor.
DWA-2000A complete with various function, such as high luminance 7-segment, manual/auto calibration, alarm out etc. The controller provides reliable data with 4-20mA output including isolation function and every circuit for transmission.
This product is registered with SPAN.