- Electrode holder and protection
- Easy calibration routine
- Flange or PE collar fitting
- For 1 electrode with PG 13.5 fitting
- PVC, PPH or stainless steel construction
- Cable outlet through PG 9
| Immersion height: | 1 m (standard) |
| Construction: | PVC, PPH |
| Head: | PBT glass fiber reinforced – IP 65 |
| Cable output: | PG 9 |
| Fitting: | PE flange 9358, ND 50, adjustable or PE collar, for diam. 50 mm |
| Temperature limits: | PVC: +55 °C; PPH: +100 °C |
The BAMO immersion probe holder 9336 is designed for all pH and ORP measurements in tank, drain, basin, open channel. Standard construction is of PVC, PPH or AISI 316, diameter 50 mm. The electrode holder is designed for a calibration routine without dismantling electrode. Electrode protection end is removable from the holder; the buffer flask grips on the holder during calibration.
There is no need to hold the probe during calibration. The probe can stand on the floor. No more spilled buffer neither damaged electrode.
Note: This probe can only be used with associated electrodes. Only electrodes with threaded fitting PG 13.5 can be mounted on these probes.