- Control and indication of flow rate in pipings (cooling, lubricating, etc.) or in any compatible skids
- Vertical mounting
- 1 Indicator + 1 adjustable contact
- Material: stainless steel or brass
- Pressure limit 10 bar
- Flow ranges within 0.1 to 50 l/min
| Pressure limit: | 10 bar (Both versions, brass and stainless steel) |
| Pressure drop: | 0.01 to 0.2 bar |
| Temperature limits: | -20 to +100 °C (On request: Option up to 160 °C) |
| Graduated scales: | l/min (of water at 20 °C) |
| Accuracy: | ± 5 % F.S. |
| Contact type: | N.O. (without flow) |
| Protection: | Contact: IP 65 |
| Connection: | DIN 43650 plug-in socket, cable gland PE 9 |
| Brass version: | Body: Anodized aluminum Diver: Nickel-plated brass Fittings: Nickel-plated brass Direct reading tube: DURAN® 50 Seals: NBR (On request: FPM or EPDM) |
BAMO BV Metallic Flow Controller with Glass Indicator controls the flow rate in a vertical pipe with ascending flow; Liquid must be free of particles.
The fluid passing through the controller, from bottom to top, drives a diver with built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.
The upper edge of the float indicates the flow rate.
- The scale is graduated in l/min of water
- The setting of trigger point is possible over the entire measuring range
- The actual flow rate can be greater than the high range without damaging the device (it results in a higher pressure drop)
These controllers must be installed far from any magnetic induction.