- Control and indication of flow rate in pipings (cooling, lubricating, etc.) or in any compatible skids
- Vertical mounting
- 1 Indicator + 1 adjustable contact
- Material: stainless steel or brass
- Pressure limit 10 bar
- Flow ranges within 0.1 to 50 l/min
| Temperature limits: | -20 to +100 °C (On request: Option up to 160 °C) |
| Flow ranges: | l/min (of water at 20 °C) |
| Accuracy: | ± 5 % F.S. |
| Contact type: | N.O. (without flow) |
| Protection: | Contact: IP 65 |
| Connection: | DIN 43650 plug-in socket, cable gland PE 9 |
| Brass version: | Pressure limit: 200 bar Body: Nickel-plated brass Diver: Nickel-plated brass Fittings: Nickel-plated brass Seals: NBR (On request: FPM or EPDM) |
BAMO BR series controls the flow rate in a vertical pipe with ascending flow; Liquid must be free of particles.
These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots. The setting of trigger point is possible over the entire measuring range.
The actual flow rate can be greater than the high range without damaging the device (it results in a higher pressure drop).
These controllers must be installed far from any magnetic induction.