- Control and indication of flow-rate in cooling, high pressure pipings, dry-run pump prevention, etc.
- Operates in all positions
- Flow indicators, plus 1 flow contact
- Versions: Stainless steel or brass
- Pressure max. 16 bar
- Flow ranges from 0.005 up to 150 l/min
| Pressure limits: | 16 bar for fittings ¼” & ½”; 10 bar for fittings 1” |
| Temperature limits: | -20 to +100 °C |
| Measuring scale unit: | l/min (of water at 20 °C) |
| Accuracy: | ±10 % F.S. |
| Pressure drop: | BSP 1″: 0.02 to 0.4 bar BSP ½”: 0.02 to 0.3 bar BSP ¼”: 0.02 to 0.2 bar |
| Switch: | N.O. without flow |
| Hysteresis: | ≈1.5 mm |
| Connection: | DIN 43650 plug-in socket IP 65 |
| Brass version: | Body: Anodized aluminum Fittings & orifice plate: Nickel plated brass Spring: AISI 316 Ti (1.4571) Seals: NBR Magnet: Ferrite Glass tube: Glass DURAN® 50 |
| Stainless steel version: | Body: Anodized aluminum Fittings & orifice plate: AISI 316 Ti (1.4571) Spring: AISI 316 Ti (1.4571) Seals: FPM Magnet: Ferrite Glass tube: Glass DURAN® 50 |
BAMO CDV flow indicator is used to monitor and visualize the flow rate in a vertical or horizontal pipe with a fluid free of suspended particles.
Operation: The fluid drives a magnetic orifice plate inside the cylindrical measuring tube. A spring balances its movement and allows to operate in all positions. The upper edge of the diver corresponds to the scale mark (graduated in ml/min or l/min) A Reed contact, N.O. with no flow, is adjustable all along the scale, its status changes with the passage of the plate.
With these equipment, the CDV operates independently of the pressure, even in low flow rates.