⚠ Attention: Discontinued product
- For viscous liquids: 5 to 8,000 cSt
- Low pressure drop
- Accuracy ±1 %
- BSP-F ¼”
- Up to 10 bar
| Flow range: | 60 … 5350 cm³/min (depending on viscosity) |
| Accuracy: | ± 1% (depending on viscosity) |
| Repeatability: | < ± 0.25 % |
| Operating temperature: | -10 to +65 °C |
| Pressure limit: | 10 bar at 20 °C |
| Mounting position: | Horizontal (recommended) |
| Couplings: | Inner diameter: 7 mm |
| Viscosity range: | 5 to 8,000 cSt |
| Power supply: | 4.5 to 24 V DC (12 V DC recommended) |
| Consumption: | 8 mA to 25 mA Max. |
| Output: | NPN, open collector |
| Signal voltage: | 0V GND |
| Signal load: | Max. 5 mA |
| Leak current: | Max. 10 μA |
| Connector: | 3-pin AMP 2.8 x 0.8 mm |
| Signal: | Square pulse |
| Cycle: | 50 % / ±3 % |
| Housing: | PEEK 150 GL 30 |
| Axes: | AISI 316 L |
| Sealing: | FPM O-ring seal (EPDM on request) |
| Oval wheels: | PEEK |
| Magnets: | NdFeB (Neodym) without contact with the liquid |
⚠ Attention: Product has been discontinued. You are currently viewing old documentation. Please use with caution.
BAMO OV16 oval wheel flow sensor is designed for dosing and flow measurement of viscous liquids such as syrups, oils and more or less concentrated detergents. It consists of two gear wheels driven by the fluid. Each rotation corresponds to a precise quantity of liquid. Each wheel with built-in magnet, delivers pulses (hall effect); The number pulses is proportional to the flow rate.
The measuring ranges (min. to max.) may vary according the viscosity, temperature and pressure.