- For level of liquid on any kind of tanks
- Versions for neutrals, alkali or acidic fluids
- Versions for side or top mounted
- Max. 250°C medium temperature
- Explosion proof version available
| Mounting: | Side mounting | Verticle mounting | ||
| Model: | MKA-21 | MKG-2 | MKS-2 | MKA-23 |
| Pressure: | 25 bar max. | 16 bar max. | ||
| Liquid temperature: | -20 to +250 °C | 0 to +100 °C | 0 to +200 °C | -20 to +250 °C |
| Ambient temperature: | -20 to +80 °C | |||
| S. G.: | From 0.7 to 0.85 (Refer to datasheet) | |||
| Hysteresis: | Fixed | Adjustable | ||
| Insertion distance: | Refer to datasheet | |||
| Wet parts material: | AISI 316 Ti | |||
| Housing material: | Housing material | |||
| Switch: | Micro-switch (N.O. & N.C.)* * N.O. and N.C. terminals should be connected to equipotential circuits |
|||
| Switching power: | 250 V AC 12-10 A / 220 V DC 13-0,6 A (IEC 947-5-1) | |||
| Switching power, Ex version: | 250 V AC 12-2,5 A / 220 V DC 13-0,3 A (IEC 947-5-1) | |||
| Connector: | With 1 pressure gland, PG 16 (cable 5×2,5 mm²) | |||
| Protection: | IP 65 | |||
| Class: | Electric protection Class 1 | |||
| Approval: | Ex II 1/2 G Ex dme IIC T4…T6 (Excepted for MKG and MKS) | |||
BAMO Nivomag magnetic float level switch is used for level detection of liquids in all types of tanks. They are perfectly suited for use in condensate tanks, base tanks, storage tanks or to provide an alarm for low levels of lubricating oils or fuels.
The Nivomag is a compact 316 stainless steel switch. Measurement principal : a non-contact coupling system is realised by the permanent magnet of the float placed in the tank that can activate the microswitch situated in the housing mounted on the outside. Therefore, the unit does not require external power.
The variety of both the top and side mounted versions makes it easy to install the switch in any tank at any location. For the simplest level switching you can select models with fixed hysteresis, while for level control application we offer Nivomag switches with adjustable hysteresis.
All parts in contact with the fluid are made of stainless steel. Models with rubber or silicon sleeves can be applied for contaminated liquids. This sensor is suitable for applications up to 25 bar and 250 °C for liquids with densities greater than 0.7.
Refer to datasheet for specifications and drawings. Pricing varies according to specifications, mounting and stem length.