- Float level detection
- For aggressive and non electrically conductive liquids
- Positive active alarm
- Auto diagnostic system and LED indication
- Approvals: DIBT Z-65.11-355, for overfilling detection WHG §19, and VLAREM II
| Main power supply: | 15 to 26 V DC; caution: DC current circuit should be protected by a fuse of 250 mA. |
| Power consumption: | Approx. 3W |
| Operating pressure: | Atmospheric, 0.8 to 1.1 bar |
| Terminal housing: | PBT, fibre glass reinforced, IP 65 acc. EN 60 529 |
| Ambient temperature: | -20 to +60°C |
| Terminals: | Screw connectors, IP 20; max. wire cross-section 2.5 mm2 |
| Cable gland: | M20 x 1.5 [cable Ø 5 to 9 mm] |
| Output: | 1 changeover contact |
| Outputs: | Switch [+DO / -DO]: optocoupler NPN, maximum 30 mA Switch [+AO / -AO]: current 0 to 20 mA |
| Configuration: | 4 DIP switches |
| Lighting signal: | 1 LED inside the terminal housing for correct operating |
BAMO Maximat VK C is designed to detect conductive liquids non electrically conductive. The detection results from position of a magnetic inside the float and a Reed contact. The liquids may not generate deposits originating jamming of float. The Maximat VK C has 3 different outputs, factory built-in:
- Binary output to an active optocoupler, numeric input
- Analog 0 to 20 mA output for any analog input of PLC
With its integrated transmitter and connection for diagnostic, Maximat VK C is ideal to detect the liquid level and to give an alarm before the overfilling of a tank. Convenient to use with non electrically conductive liquids, oils, emulsified, non-flammable, water endangering liquids; even highly aggressive liquids. It is a perfect instrument to detect fluid in a double-wall tank. Maximat VK C operates with liquids of specific weight from 0,7 kg/dm3.