- Wet parts in plastic materials
- Compact probe
- Plug for function test
- Switches when pipe is empty
- No moving parts
- Applications:
- Protection against dry run; Detection of empty filling pipe
- Prevents hammer effects when air is compressed in the pipe
| Power supply: | 15 to 27 V DC |
| Consumption: | < 1 W |
| Output: | Potential free Reed contact N.C. with liquid; N.O. without liquid (in air) Rated: Max. 50 V AC / DC; Max. 0.5 A; Max. 10 VA for PLC connection or coupling relay |
| Connector: | Screw terminals, IP 20, cable Max. 2.5 mm² |
| Additional function: | Connection to an external test button, with which the whole electronics, wiring and signaling device can be tested. |
| Probe: | PE, or PP |
| Length: | Min. 95 mm |
| Fitting: | Union nut BSP 1”, includes EPDM o-ring |
| Ambient temperature: | -20 to +60 °C |
| Pressure limit: | 2 bar |
| Housing terminal: | PBT, IP 65 acc. EN 60529 |
Caution:
When supply is switched on, the output contact remains closed about 0.5 second during the auto-test routine.
The Capsytron TLS sensor is of one piece; Previous series had 1 detector and 1 reference electrode, separated of each other (SFL / SFL BZ). To adapt actual model to an old series holder, we recommend to plug i
BAMO Capsytron TLS is designed for empty tube detection. It avoids hammer effects when filling a tank. It is designed to detect the presence of liquids whose reactance is 50 pF. In no case should liquids form insulating or conductive deposits.