- Tank height from 250 to 3000 mm
- Transmission: angle drive
- Fitting: male 2” BSP
- Head housing: IP 54
- 3 possible functions:
- Direct reading
- With 1 to 3 contacts, potential-free
- Output signal: continuous resistive signal (Ω)
| Materials: | Steel, Nylon Float: Foamed PVC |
| Flange seal: | Cork gasket |
| Fitting: | 2” BSP, male |
| Head housing: | IP 54 |
| Operating pressure: | Atmospheric |
| Operating temperature: | 0 to 40 °C |
| Measuring distances: | Model 1: From 250 up to 1100 mm Model 2: From 1100 up to 3000 mm |
| Scale: | Liters |
| Contact(s): | Default setting: – Filling function: ON at 50 % and OFF at 80 % capacity (2-way contact, 10 A, 230 V, potential free)- High level: 90 % capacity (Change-over contact, 10 A, 230 V, potential free) – Low level alarm: 30 % capacity (Change-over contact, 10 A, 230 V, potential free) On request: Factory adjustment between 10 and 90 % |
| Output, resistive signal: | From 0 to 90 Ω (approx., ±15 % |
BAMO CF3/CF4 level gauge is designed for level display and filling control of diesel in storage tank or day-tank, stored lubricating oil, glycol water, and rainwater. It is particularly suited to meet the needs and conditions of use for storage tanks or day-tank of diesel generators.
The electric gauge is mounted above the tank. Against the liquid height, the float transmits the level through an angle drive to a vertical stem. The stem actuates on a pointer associated with a graduated dial to display the level in the tank. Depending on the model, it can also act on contacts, and/ or a potentiometer which will deliver an ohmic value image of measurement.