- For retention receiver and gutter
- Stem length: from 150 to 2000 mm
- Easy installation
- Output: contact, potential free
- Gauge head housing: IP 54
| Materials: | Stem: Stainless steel Float: Foamed PVC |
| Gauge head: | IP 54 |
| Operating pressure: | Atmospheric |
| Operating temperature: | 0 to 40 °C |
| Contacts: | 1 or 2 change-over contacts, 4 A, 230 V, potential free Factory setting |
BAMO CF30 float switch and its variants, are designed to detect eventual leaks from the main tank falling into the retention receiver. It is compatible with liquids like fuel-oil, lubricating oil, rainwater and water-glycol mixture.
Against the liquid height, the float lift up a stem actuating a change-over contact. The fitting allows installation on almost any day-tank or retention receiver. The stem length may be modified on request. Several versions are available depending on detection heights and mounting:
- CF30 Model:
- The float is mounted vertically to reduce dimensions.
- Standard stem length: 400 mm
- Other stem lengths are available on request (150 – 950 mm)
- Detection from 100 mm of liquid as a minimum.
- CF30 Twin model (on request):
- This model is equipped with 2 contacts and 2 vertical floats to reduce the dimensions.
- One level detector is for alarming in case of leaks (retention receiver) while the second level detector allows to switch off a pump and actuate solenoid valves.
- CF31 Model:
- The float is mounted horizontally for detection as soon as possible.
- Standard stem length: 165 mm
- Other stem lengths are available on request (150 – 2000 mm)
- Detection from 20 mm of liquid as a minimum.
- CF32 Model (on request):
- Similar to CF30 model, but with BSP 2” fitting