BMG 72 Wall Mount Galvanometric Indicator
Brand: BAMO
- Lead Time: 4~6 weeks
Categories: Automation and Control
- Wall mount box IP 55
- Dial 72 x 72
- 1 Analogue input
- 1 Analogue output 0/4-20 mA
- 2 Relay outputs
| Wall mount case: | Polycarbonate grey; IP 55 |
| Terminal block: | 13 screw terminals; 4 mm² |
| Cable glands: | PE 11 (x2) and PE 9 (x3) |
| Dial – Pointer: | Galvanometer 72×72 mm; black pointer |
| Supply: | 80 to 256 V AC – 50/60Hz; 20 to 240 V DC no polarity |
| Consumption: | < 4 VA |
| Ambient temperature: | -10 to +45 °C |
| Signal input: | Current: 0-20 or 4-20 mA Potentiometer: From 470 Ohm to 100 kOhm |
| Output: | Current: 0-20 or 4-20 mA (load < 700 Ohms) Relays x2: Change over – Switching capacity 500 mA / 250 V Voltage: 0-10 V (load > 2 kOkm) – Other on request |
BAMO BMG 72 galvanometric indicator is designed for local display and control of an analogue input signal. It is particularly well suited for control rooms on diesel-oil stored for generators and boilers. Lot of additional applications are available: Water storage monitoring, local display of temperature, flow rate, pressure, etc.