Skip to content

Multicont Multi-Parameter Monitor

Brand: BAMO
  • Lead Time: 4~6 weeks
Categories: Automation and Control
BAMO Mesures Multicont Multi-Parameter Monitor, ISME Malaysia
  • Versions from 1 to 15 channels
  • Graphic display: LCD or OLED
  • Power supply to transmitters
  • RS485, protocol HART® or Modbus®
  • Relay outputs or/and 4-20mA outputs
Ask for Quotation
Power supply:  85 to 255 V AC 50/60 Hz; 12 VA
11.4 to 28 V AC 50/60 Hz; 12 VA
11.4 to 40 V DC; 11 W
Power supply to transmitters:  30 V DC; 60 mA
Display:  LCD or OLED display unit; 128 x 64 pts
Relay outputs (Max. 5):  4 or 5 relays, SPDT, 250 V AC, AC1, 5 A
Analogue output (Max. 2):  1 or 2 analogue outputs 4–20 mA
With galvanic insulation and overvoltage protection, load Max. 500 Ohm
Communication:  RS 485 serial link with HART or Modbus protocol
Records capacity:  Memory: 65,000 data on memory card (Max. 64 Gb)
Cabinet:  IP 65 – Polycarbonate – Wall mounting – Mass: 0.9 kg
Version with transparent plastic lid
Ambient temperature:  -20 °C to +50 °C
Electrical protection: Class I/III
Ex class: Ex II (1) G [Ex ia Ga] IIB, Ex II (1) D [Ex ia Da] IIIC
Intrinsic safety:  Uo = 30 V, Io = 140 mA, Po = 1 W, Lo = 4 mH, Co = 200 nF, Um = 253 V
Power supply to Ex transmitters:  25 V DC; 22 mA
Ambient temperature:  -20 to +50 °C

BAMO Multicont is a universal interface between various level transmitters using HART® or Modbus® protocol and the other elements of the process control system such as the PC or PLC.

Multicont can communicate with up to 15 transmitters (2- or 4-wire) with HART® protocol, but, with only 6 radar transmitters Pilotrek (maximum).

Note: Multicont delivers power supply to a maximum of 2 transmitters.

The unit can perform various operations such as remote settings, loading the programming of a unit or downloading measured values. The graphic screen facilitates access to a wide variety of functions such as displaying the contents of a tank or the status of compatible ultrasonic transmitters.

Multicont offers numerous configuration possibilities, obtained by adding and combining scalable modules: up to 2 analog outputs and/or from 1 to 5 relays. The option RS485 interface allows connecting of several MultiCONT together to increase the number of transmitters in use.

ATEX version of the MultiCONT allows you to control a multipoint system with a maximum of 4 devices (or only 2 PiloTREK); The unit must be installed in the safe area. MultiCONT Ex versions provide power for 2-wire Ex-compatible transmitters installed in hazardous areas and display the measured values. Multicont is competitive regarding all possibilities it offers, it achieves an incomparable low investment with multiple connected transmitters, up to.

Datasheet