- 1 Frequency input
- Power supply to sensor
- 2 Analogue outputs (current or voltage)
- 2 Relay outputs
- Set up through a joystick or a PC
- Universal main power input: 80 to 256 V AC 50/60 Hz ; 20 to 240 V DC
- Total insulation: Inputs, Outputs, Power / 2500 V AC
| Main power supply: | 0 to 256 V AC 50/60 Hz and 20 to 240 V DC (no polarity) |
| Consumption: | < 4 VA |
| Display: | Graphic LCD screen |
| Temperature limits: | Ambient: -10 to +60 °C Storage: -25 to +80 °C |
| Protection: | IP 20 |
| Mounting: | DIN rail, 17.5 mm |
| Connections: | 4 removable terminal blocks |
| Set up: | Through its joystick or with a PC |
| Accuracy: | 0.1 % |
| Conversion: | Digital / Analog output: 16 bits |
| Thermal drift: | < 25 ppm |
| Frequency: | 1 Hz to 1 kHz 1 Hz to 1 kHz 100 Hz to 100 kHz |
| Voltage: | Sine, square, triangular, trapezoidal From 1 V to 500 V Input impedance: 3 MΩ PNP/NPN or potential free contact |
| Insulation: | Power / Input: 2500 V AC, 50 Hz, 1 min Input / Analogue output: 2500 V AC, 50 Hz, 1 min Analogue outputs 1 / 2: No insulation Power / Analogue output: 2500 V AC, 50 Hz, 1 min |
| Current: | 0-20 / 4-20 mA (Impedance < 700 Ω) Scalable range: 0 to 22 mA Residual ripple: < 20 μA |
| Voltage: | 0-10 V (Impedance > 2 kΩ) Scalable range: 0 to 11 V Residual ripple < 10 mV |
| Relays: | SPDT – 500 mA / 250 V |
Bamotop is designed to convert a frequency signal into an analogue signal (ie. Inputs signals from dry contacts, CMOS and TTL circuits, magnetic sensors, PNP/NPN sensors). Bamotop receives a frequency input signal that it processes numerically to convert it into an analogue voltage or current signal. Two analogue outputs can be assigned in mA or mV; Two relay outputs can be set over the entire input scale (value, hysteresis and time delay).