⚠ Attention: Discontinued product
- 2 independent sensors
- Input 1: range 0…20 MΩ
- Input 2: scalable range 0 to 20 MΩ / 0 to 2 MΩ
- Dedicated probes and sensor with Factor probe C = 0.01, 0.1, 1 and 10
- 2 adjustable analog output 0/4-20 mA
- 3 relay outputs (NO contact)
- Wall mounting IP 65
| Displayed parameters: | Measurement values – Configuration Menu |
| Display: | Back lighted – 1 line of 16 alphanumerical characters; 9.2 mm high |
| Indication: | LED alarms status |
| Configuration: | 8 push buttons keyboard on front face – Keyword protected |
| Scales: | 200 Ω to 200 MΩ |
| Accuracy: | ±0.3% |
| Probe input: | Coaxial connector BNC type Input 1: 20 MΩ Input 2: adjustable |
| Temperature compensation: | On range 20 MΩ, automatic with an input for a 3 wires Pt 100 Ω /0° Manually from 0 to 100°C CAUTION: with 0.1 sensor Factor there is no automatic compensation (manual only) |
| Relay outputs: | 3 closing contacts (Silver alloy), voltage free |
| Thresholds: | 3 programmable independent thresholds – with adjustable hysteresis 0 to 100% – and adjustable timer from 0 to 9999 sec |
| Output relay (S4): | Not available |
| Contact: | Initial resistance 100 mΩ as a maximum (voltage drop 6 V DC 1 A) Rated at 831 V AC / 3 A / 277 V AC ; 90 W / 3 A / 30 V DC Switching capacity (minimum) 100 mA, 5 V DC (depending of switching frequency, ambient conditions, accuracy) Mechanical life time (minimum) 5 x106 operations (180 commutation/min) Electrical life time (minimum) 2 x105 (20 comm./min) [3 A, 125 V AC], [3 A, 30 V DC] and 105 (evaluated charge) for 3 A, 125 V AC |
| Calibration sequence: | Relay outputs inhibited, analogical outputs stand on last values |
| Measurement output: | 0/4-20 mA (maxi 600 Ω) proportional to measurement, galvanic insulated |
| Program testing: | Simulation through the menu on measurement and relays outputs |
| Main power supply: | 230 V AC / 50-60 Hz [other on request] – Consumption 10 VA |
| Models: | Wall mounting, IP65, cable glands, connections on screw terminal |
| Data Logger: | Cycle average measurement record, with a programmable period, 150000 records maxi on MMC (multi media card) / External driver necessary |
⚠ Attention: Product has been discontinued. You are currently viewing old documentation. Please use with caution.
BAMO Bamophox resistivity metre 319 ML / DB is designed for process control and survey of demineralised water through two bottles of resins.
- Input 1: controls the first bottle, as a blind instrument (without display). As soon as the fluid resistivity is less than the preset value the relay 1 switches a signal alarm to inform the operator.
- Input 2: controls the second bottle with its own alarm parameters. The measurement of resistivity is permanently displayed.
3 relay outputs are to be used either for the input 1 or input 2; adjustments are done by the operator.
The 4-20 mA outputs allow the report of process operations, in order to have a true image of water quality.