- Stainless steel ball valves
- Fittings from ¼” up to 2”
- Electric actuator with position pointer and manual operating for emergency
| 3-way ball valve: | |
| Body: | AISI 316 |
| Seal: | PTFE |
| T or L bore shapes: | AISI 316 |
| Ball seat: | PTFE with 15 % glassfiber |
| Fittings: | BSP, female threads |
| Pressure limits: | 40 bar |
| Operating temperature: | -30 to +100 °C; Up to 140 °C: on request Over 100 °C: On request |
| Electric actuator: | |
| Movement: | 90° |
| Emergency operating: | Manual override |
| Duty rating: | 30 % |
| Protection: | IP 65 |
| Connections: | 1 cable gland ISO M20 1 connector 3 pins + ground, DIN 43650 |
| Consumption: | 15 W: ¼” to 1’’ 45 W: 1 ¼” to 2’’ |
| Multi-voltage power supplies: | 100 to 240 V AC 50/60 Hz and 100 to 350 V DC 24 V AC 50/60 Hz or 24 V DC |
| Options: | Fail safe (back to 0° in case of power failure) Electronic positioning servo on 4-20 mA signal (or 0-20 mA, or 0-10 V) |
BAMO VE3V-INOX electrically actuated 3-way ball valves are useful for redirecting or to stop the flow of liquids in piping systems. These models are designed for aggressive liquids; In standard versions they allow a manual operating for maintenance (or emergency operations) and a position pointer. The power supply must be switched off before a manual operating.