- Product registered with SPAN
- RS485 signal output
- Electrochemical conductivity sensor
- Stable data and good repeatability
- Strong anti-interference ability
- Fast response time
- Low maintenance cost
- Suitable for tap water, drinking water, swimming pool water, medical wastewater, sewage, industrial wastewater, seawater
O3600 Series Ozone Sensor
| Measuring range: | 0 to 20 mg/L |
| Precision |
Range: 0-2ppm: < 1% Range: 2-20ppm: < 3% (Calibrated at 25°C, pH=7.2, potable water, full scale repeat) |
| pH range: | pH 2-11 |
| Flow rate: | In the flow cell: 250-500ml/min, the flow rate has little effect on it |
| Response rate: | T90: about 15s (up to 90% of the measured value) |
| Slope calibration: | On the measuring device, determined by analytical methods |
| Temperature compensation: | Integrated automatic |
| Material: | PVC-U, Semipermeable membrane, ABS |
| Operating temperature: | 0 to 45°C (no condensation in water) |
| Ambient temperature: | 0 to 55°C |
| Dimension: | Diameter 25mm x Length 220mm |
| Cable length: | Standard 5m cable, can be extended up to 100m |
IUNI-21 Dual Channel Analyzer
| Display: | 160*160 LCD with backlight |
| Power supply: | AC: 85-500V AC, 50/60Hz DC: 9-36V DC (upon request) |
| Analogue output : | 3 x 4-20mA |
| Relay output: | 3 x relay output (programmed response parameters and value) |
| Communication protocol: | RS485 (Modbus) |
| Ambient temperature: | -20 to 70°C |
| Operation temperature: | -15 to 60°C |
| Protection: | IP65 / NEMA 4X |
| Device weight: | 1.35 kg |
| Device dimension: | 145 (H) x 125 (W) x 162 (D) mm |
| Enclosure: | PA66+GF25+FR (Cover); Aluminium alloy powder (Lower casing) |
| Parameter: | Ozone |
The O3600 series Ozone sensor is a 2-electrode measurement system using coating method. The detection part adopts a special permeable membrane technology, which has the characteristics of resisting chemical (mainly surfactant) interference and reducing pH dependence. It offer fast response, stable performance, low cost and low maintenance, providing users with reliable and accurate data. Suitable for tap water, drinking water, swimming pool water, medical wastewater, sewage, industrial wastewater, seawater, etc.
The IUNI-21 dual channel analyzer is an effective option that can connect two digital residual chlorine sensors at the same time to reduce the cost of transmitter and installation space:
- Field mounted dual channel analyzer with datalogger
- Connect two sensors at one time
- 4-20mA output
- Relay output
- Communication, RS485 (Modbus)
- LCD visual display
- User-friendly and attractive operating interface