Skip to content

Category: Success Stories

Flow Verification Service for Waste Management Facility Negeri Sembilan

Planning A Yearly Flow Verification Service Strategically

Yearly I-SYSTEM flow verification is important because it ensures flowmeters continue to operate at optimum condition, in line with operational, ISO audits and regulatory expectations. Over time, accuracy of a
Read More
POME Continuous Adsorption System Control Panel, ISME Malaysia

Continuous Adsorption System Control Panel for Palm Oil Mill

Continuous Adsorption System Control Panels are developed to monitor and optimize the treatment performance of Palm Oil Mill Effluent (POME) to meet the stringent discharge standards.
Read More
Industrial Effluent Treatment System IETS Control Panel at TNB Facility, ISME Malaysia

Industrial Effluent Treatment System (IETS) Control System at Utility Facility

A 190m3/day capacity plant upgrade proposed by client includes oily water separator and physical chemical treatment process via coagulation/flocculation and filtration processes to ensure the effluent could be safely discharged to the environment.
Read More
We recently collaborated with our client to develop a turbidity test skid for a R&D facility specializing in water quality research in Malaysia

Turbidity Test Skid Solution Provided for R&D Facility

We recently collaborated with our client to develop a turbidity test skid for an advanced R&D facility specializing in water quality research in Malaysia. Our scope of work encompassed the delivery of
Read More
During the flow verification, we ensure that the flow sensor is installed in the flow stream at a location where there is no disruption of steady flow by upstream or downstream blockage. Sensor height is adjusted to achieve optimal result.

Flow Verification and Calibration Services for Port Facility

Our technical team conducted a replacement and verification service for the pH sensors and the ultrasonic flow meter at a port in Perak.
Read More
REMOX control system is designed to ensure consistent biocatalyst dosing onto palm fruit to improve CPO yield during the fruit press process.

Biocatalyst Dosing Control System for Palm Oil Industry

The REMOX dosing control system is designed to ensure consistent biocatalyst dosing onto palm fruit to improve CPO yield during the fruit press process.
Read More
REMOX control panel is designed to be compact enough to fit into a container where space is a premium.

Containerized Water Treatment System Control Panel

The idea of a containerized UF water treatment plant is developed by our client’s research team to combat the contaminated water in local community areas especially for flood victims.
Read More
A PLC based control system for a SBR batching WWTP system. System uses a PLC to allow flexible setting of the huge amount of timers involved with the SBR process.

SBR Batching Control System for Metal Processing Factory WWTP

A PLC based control system for a SBR batching WWTP system is developed for the client. System uses a PLC to allow flexible setting of the huge amount of timers.
Read More
A comprehensive REMOX control system that oversees the leachate treatment process that treats highly contaminated and toxic wastewater.

Landfill Leachate Treatment Control System

We developed a comprehensive REMOX control system to help our client oversees the leachate treatment process that treats the highly contaminated and toxic wastewater from the leachate treatment process.
Read More
Operators uses HMI to visualize information to assist them in supervising and controlling.

Visualize Your Process with HMI (Human Machine Interface)

Human Machine Interface (HMI) in industrial context are screens that connect users to machines, instruments and operations. Operators uses HMI to visualize information to assist them in supervising and controlling.
Read More
Flow Verification Service for Waste Management Facility Negeri Sembilan

Flow Verification Services for Waste Management Facility

Recently, Team ISME conducted a flow verification service at an industrial waste management facility in Negeri Sembilan.
Read More
ISME Sdn Bhd's modern facilities will enable smoother work flow in custom control panel assemblies, electrical wiring, FAT (Factory Acceptance Test), quality control checking, troubleshooting, bench repair work, etc.

Behind the Doors of an Industrial Control Panel

In modern-day industrial processes, industrial control panels are designed to improved productivity and efficiency. However, there is no one-size-fits-all solution in industrial control panel.
Read More
Refurbish and reprogram the existing UF control system to improve serviceability at a leachate treatment plant.

Refurbishment of Existing Control Panel at Leachate Treatment Plant

Our team assisted the client to refurbish and reprogram the existing UF control system to improve serviceability at a leachate treatment plant.
Read More
Flow Verification Service for R&R Sewage Treatment Plant

Flow Verification Services for Rest Area Sewage Treatment Plant (STP)

Our Technical Team has been on the go last week to perform flow verification services at several rest area (R&R) sewage treatment plants (STP).
Read More
Control panel design starts with a conversation with the client, Q&A meeting with the project team or a site inspection to understand the needs and technical specifications.

REMOX Industrial Process Control Panel & System Integration

Automation and control are playing a significant role in modern-day industrial processes.
Read More
Control system ensures chemical is always top-up automatically to the chemical tanks. Control system also controls the dosing pump to ensure the water in the plant is properly dosed.

Chemical Storage, Preparation and Dosing Control System for Glove Industry

The REMOX control system is developed for client to ensures chemical is always top-up automatically to the chemical tanks in a glove factory.
Read More
I-SYSTEM UOL Open Channel Flow Meter, ISME Malaysia

T&C UOL Ultrasonic Open Channel Flow Meter

Recently, our Technical team conducted a T&C for the I-SYSTEM UOL Ultrasonic Open Channel Flowmeter at a STP.
Read More
Each individual train control system is designed as an individual plant with its own control panel inclusive of PLC and HMI control system.

Remote Monitoring & Control for WTP in Sabah

Recently, ISME have supplied a batch of process instruments and control panels for a water treatment plant in Sabah.
Read More
Pipe jacketing and insulation of the identified pipe section is removed for measurement purpose for the energy verification service for building chiller system.

Energy Verification and Audit for Building Chiller System

Recently, we carried out a chilled water energy measurement and monitoring services for a commercial building chiller system in Kuala Lumpur.
Read More
Flow verification service to ensure that flowrates are accurate comparing against the discharge table for V-Notch flume.

Flow Verification For Rest Area Sewage Treatment Plant

A series of flow verification services are carried out for open channel flow meters at rest area (R&R) sewage treatment plant (STP) along the highways running through the west coast of Peninsular Malaysia.
Read More
Due to the huge power requirement of EO process, a PLC control system developed to help clients operation ensure only the required amount of power is used without wasting excessive energy.

Leachate Treatment Plant EO Control Panel

Due to the huge power requirement of EO process, a PLC control system developed to help clients operation ensure only the required amount of power is used without wasting excessive energy.
Read More

Pumphouse System Upgrade: MQTT vs SMS

Following the initial implementation of the pumphouse system 2 years ago, an upgrade is required for the communication protocol.
Read More
HMI display overview of the operation for air compressor monitoring system.

Air Compressor Monitoring System

An air compressor's main function is to convert power into potential energy stored in pressurized air. The compression creates energy which can be utilized to power a variety of industrial application.
Read More
Onsite flow verification service for open channel flow meter with a parshall flume configuration at a paper mill in Selangor.

Flow Verification Service for Paper Mill

A flow verification service is carried out for electromagnetic flow meters and open channel flow meters at a paper mill in Selangor, Malaysia.
Read More
I-SYSTEM flow verification service for electromagnetic flowmeter at bleaching earth manufacturer in Johor.

Flow Verification for Bleaching Earth Manufacturer

A flow verification service is carried out for bleaching earth manufacturer in Johor, Malaysia.
Read More
The HMI shows the parameter at the main page and the status of pumps and valves.

Pumphouse Monitoring System for Residential Area

A pumphouse or pump station is a facility that includes pumps and equipment for pumping fluids from one location to another.
Read More
Factory acceptence test for REMOX control panel for glove factory wastewater reclaim plant in Selangor.

Wastewater Reclaim Plant For Glove Industry

Following the success of the previous UF and RO plant setup, the client decided to double the water production in the facility by building another UF and RO plant in the facility.
Read More
Flow verification service of effluent flowmeter at a WWTP for automotive factory in Melaka.

Flow Verification Service for Automotive Factory

A flow verification service is carried out for an automotive factory in Melaka, Malaysia. End user required solution for measuring consistency of flow within pipe repeatedly over a period of time.
Read More
Verification service for Building Management System (Chiller) for commercial buildings in central of Kuala Lumpur.

Verification Service for Building Management System (Chiller)

A flow and temperature verification service is carried out for 9 commercial buildings located in Kuala Lumpur, Malaysia.
Read More
Flow verification service for food processing plant in Negeri Sembilan.

Flow Verification Service for Food Processing Plant

A flow verification service is carried out for an international food processing plant in Negeri Sembilan, Malaysia.
Read More
Preventive maintenance with flow verification service for electromagnetic flowmeter by ISME Technical Team.

Preventive Maintenance with Flow Verification Service

Accuracy and consistency are pivotal requirements for the data of flow instrument measurement.
Read More
Inside view of the control panel, the starters on the left and the PLC control system on the right hand side.

UF RO Plant Scada System for Glove Industry

To cater for ever-increasing water demand for proposed site and nearby factories, a plan have been set in place to build a UF and RO plant to cope with water demand in the surrounding glove factories.
Read More
Scrubber monitoring dystem for glove industry, Selangor

Scrubber Monitoring System for Glove Factory

Scrubbers are used in many industrial processes to remove potentially harmful and polluting gas emissions before they enter the atmosphere.
Read More
Inside view of master control panel showing the 3 nos of ABB VFD used to regulate permeate pump output based on demand.

6MLD UF Water Treatment Plant Control System

For the last 30 years, there is no proper water treatment plant in the remote area due to the lack of the need of one (the natural water in the area as clean enough not to require treatment).
Read More