- For liquids electrically conductive or not
- Ranges from 0.024 up to to 60 l/min
- Wet parts all in PE-HD
- 1 Analogue output 0/4-20 mA
- 1 Digital output (various functions)
- For measuring flow and dosing liquids:
- Demineralized water, cosmetics, liquid foods
- Toxic chemicals
- Aggressive liquids such as acids and alkalis
| Diameter: | DN5, DN7, DN10, DN15 |
| Range: | 0.024 to 3 L/min, 0.09 to 6 L/min, 0.3 to 24 L/min, 0.9 to 60 L/min |
| Power supply: | 24V DC / 3.6W |
| Outputs: | 1 Digital output to set up (pulses or alarm for empty tube, flowing back alarm, dosage, or min./max. alarms). 1 Analogue output 0/4 … 20 mA, scalable |
| Display: | Alphanumeric back lighted LCD display |
| Connections: | Connector M12 -5 pins (supplied) |
| Accuracy: | Standard, ±2 % of reading and ±3 mm/s (According VDI/VDE 2642) |
| Repeatability: | ≤ 0.5 % |
| Liquid temperature limits: | 0 to +60 °C |
| Pressure limits: | 7 bar max. at 20 °C |
| Protection: | IP 65 |
| Fittings: | Internal thread BSP |
| Materials: | PE-HD (option: PVDF for DN10) |
| Options: | Access to engineering parameters with USB/RS485 adaptor and software Remote display Accuracy: ± 1 % of reading and ± 3 mm/s |
Bamoflonic 42i low flow ultrasonic flowmeter applies propagation ultrasonic waves principle to measure the speed of a liquid, then to calculate the corresponding flow-rate. Therefore, it is convenient for liquids electrically conductive or not. BAMOFLONIC 42i has no moving components and is therefore wear-free.
The device is characterized by its high measuring accuracy and reproducibility. Some liquids or their concentrations may not be compatible with the ultrasonic measuring principle (Refer to datasheet).