- Level measurement of aggressive fluids
- Measuring cell: ceramic (96 %)
- Accuracy: 0.35 % F.S.
- Ranges from 0 … 0.6 m up to 0 …10 m WC
- Fitting 1 ½” in PVDF
- Applications: Diesel, lubricating oils; Viscous, pasty liquids; Corrosive, acidic or basic liquids
| Measuring range: | 0 to 0.6 up to 0 to 10 m WC |
| Long term stability: | ≤ ± 0,1 % FS / year |
| Accuracy: | ≤ 0.35 % FS |
| Measuring cell: | Ceramic AI₂O₃ 96 % |
| Fitting material: | PVDF |
| Fitting type: | BSP 1 ½” – DIN 3852 |
| Seal: | FPM |
| Connection: | Or through a connector ISO 4400, or cable output (2 m long) |
| Power supply: | 9 to 32 V DC |
| Output signal: | 4-20mA ; 2-wire |
| Load: | At 20 mA, Rmax. = (Vs – Vs min.) / 0.02 |
| Electrical protections: | Reverse polarity, overload, short circuit |
| Emissions & interferences: | In conformity with EN 61326 |
| Response time: | ≤ 0.7 s |
| Overpressure: | Less than 8 times the FS |
| Liquid temperature: | -40 to +125 °C |
| Temperature compensation: | -20 to +80 °C |
| Temperature incidence: | ± 0.1 % FS /10 K |
| Ambient temperature: | -40 to +85°C (without connector or cable) |
| Storage temperature: | -40 to +100°C (without connector or cable) |
| Mass: | 0.2 kg |
BAMO Bamoniv hydrostatic level transmitter is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks.
It operates according to the principle of hydrostatic pressure measurement. The pressure on the sensor increases proportionally with the depth of immersion.
BAMO Bamoniv integrates ceramic cell and delivers a 4-20 mA signal proportional to the immersion depth. To be mounted at the bottom of a non-pressurized tank, the BAMONIV comes with a connector or a PVC cable.