⚠ Attention: Discontinued product
- For any pulse emitter such as: Bamoflu, Bamotur, Micro-stream, FFG, DF 140, Counters M, Bamomatic (12 V)
- Input modes to configure
- Range: 1 to 25000 Hz
- Galvanic insulated output
- Current: 0/4-20 mA or 0-5/10 V
- Response time to set up From 5 ms up to 10 s
- Main power supply: 85 to 250 V AC
- DIN rail mounting
| Main power supply: | 85 to 250 V AC; 48 to 62 Hz; 6.5 VA |
| Supply to sensor: | 12 V DC ±25 % (60 mA max.) |
| Connections: | Screw connectors |
| Frequency range: | 1 to 25,000 Hz for full scale output |
| Output signal: | 0/4 – 20 mA (500 Ω max.) or 0-5/10 V (1 kΩ min.) |
| Accuracy: | ± 0.1 % |
| Resolution: | 5 μA min. / 3.5 mV min. |
| Response time: | To set from 5 ms up to 10 s |
| Input signal: | Set up through DIP Switches (7 positions), rotary switch (10 positions) and 1 push-button |
| Temperature: | 0 to +50 °C (operating); -40 to +80 °C (storage) |
⚠ Attention: Product has been discontinued. You are currently viewing old documentation. Please use with caution.
Bamotop 281 converts a frequency signal to a calibrated analogue voltage or current signal. Input types, set up by DIP switches, are: free potential contacts, CMOS and TTL, Hall Effect and NPN or PNP sensor outputs. The frequency measuring range for the analogue signal output is easily set up by DIP switches. Two other parameters can also be set.
To fix the minimum period for updating output signal; it also allows to filter gaps and too low signal variations. It sets the threshold for “low-frequency filter”.
It sets the threshold for “high-frequency filter”. In association with our flow-meters Bamoflu, FFG, Micro-Stream and all counters with pulse signal output above 1 Hz, BAMOTOP 281 is part of an efficient measuring loop.