BCP48 Programmable Counter / Downcounter
Brand: BAMO
- Lead Time: 4~6 weeks
Categories: Automation and Control
- Versatile and simple
- Dual back-lighted display: Totalizer 8 digits; Batch counter 6 digits
- 2 presets with relay outputs
- 4 counting modes
- Sensor power supply: 12 to 26 V DC
- Panel mounting, 48 x 48 mm, DIN
| Main power supply: | 85 to 265 V AC ±10 % ; 50/60 Hz 12 to 30 V DC; 12 to V AC |
| Power supply to sensor: | 12 to 26 V DC (60 mA max.) |
| Display: | Back-lighted LCD, 2 lines |
| Digits: | 6 digits Totalizer: 8 digits |
| Height: | 7 mm (higher line) 4 mm (lower line – presets) |
| Counter frequency: | 10 kHz max. |
| Input: | PNP, NPN, Namur |
| Conversion factor: | From 0.0001 up to 9 999.99 |
| Impedance: | 3 kΩ |
| Consumption: | 5 VA, 5 W |
| Relay outputs: | 2 N.O. or N.C., to set up |
| Switching power: | 150 VA / 250 V / 1 A |
| Safeguard: | On EEPROM (10 years) |
| Protection: | Front: IP 65 |
| Current: | 0-20 / 4-20 mA (Impedance < 700 Ω) Scalable range: 0 to 22 mA Residual ripple: < 20 μA |
| Temperature: | 0 to +50 °C (operating) -20 to +70 °C (storage) |
| Connections: | 2 Dismountable screw terminals |
| Mass: | 150 g |
BAMO BCP48 is a counter with outstanding performances. During its design, special attention has been paid to the comfort of use and the simplicity of its setting in function.
Its back-lighted LCD display allows simultaneous display of current value (Top line with 7 mm high characters); and to choose between preset values P1 & P2, total or auxiliary counter (Bottom line with 4 mm high characters).
Preset or changing a parameter is easy with a large 4-way key, to quickly select the desired digit and increment or decrement it. Selection of parameters (not protected) with access to end-user by programming. A batch cycle can be started or interrupted remotely.