- Cooling circuit monitoring, high-pressure washing piping, dry-run pump prevention, etc.
- Operates in all positions
- With 1 adjustable contact
- Versions: Stainless steel or brass
- Pressure: Up to 350 bar
- Ranges: between 0.005 to 150 l/min
| Temperature limits: | -20 to +100 °C (On request: Option up to 160 °C) |
| Flow ranges: | l/min (of water at 20 °C) |
| Accuracy: | ±10 % Full range |
| Pressure drop: | Fitting 1″: 0.02 to 0.4 bar Fitting ½”: 0.02 to 0.3 bar Fitting ¼”: 0.02 to 0.2 bar |
| Contact: | Standard: N.O. without flow |
| Hysteresis: | ≈1.5 mm |
| Connector: | IP 65; DIN 43650; C shape |
| Brass version: | Pressure limits: 250 bar (Fittings 1″); 300 bar (Fittings ½” and ¼”) Main parts: Body: Nickel-plated brass; other wet parts: brass Spring: AISI 316 Ti (1.4571) Seals: NBR Magnet: Hard ferrite |
| Stainless steel version: | Pressure limits: 300 bar (Fittings 1”); 350 bar (Fittings ½” and ¼”) Main parts: Body, other wet parts: AISI 316 Ti (1.4571) Spring: AISI 316 Ti (1.4571) Seals: FPM Magnet: Hard ferrite |
BAMO CDA controls the flow, on a vertical or horizontal pipe, of a liquid free of particles.
Operation: An orifice plate with a magnet is pushed by the fluid to monitor, in a cylindrical tube. A compensating spring insures the equilibrium of plate and allows the mounting in any position. A Reed contact is adjustable all along the scale, its status changes with the passage of the magnet. With these equipment, the CDA operates independently of the pressure, even in low flow rates.
CDA flow controllers must be installed away from any magnetic field. All ferromagnetic parts, must be at a minimum distance of 10 cm.