- PVC or PP, female fittings from DN 15 up to DN 50
- PTFE, BSPF from ½” up to 2”
- Pilot operated, with the liquid pressure
- Pressure from 0.3 to 6 bar
- 2-way valves
- Diaphragm EPDM or FPM
| Power supply: | 230 V AC, 50 Hz 24 V DC |
| Voltage tolerance: | ± 10% according to VDE 0580 |
| Consumption: | 230 V AC, 50 Hz: 6.5 VA 24 V DC: 5 W |
| Duty cycle: | 100 % |
| Response time: | Opening: 30 to 150 ms Closing: 50 to 1000 ms |
| Function: | Normally closed (N.C.) |
| Bore size: | 15 to 50 mm |
| Pressure limits: | 0.3 to 6 bar |
| Mounting position: | Coil in upright position |
| Diaphragm and pilot diaphragm: | EPDM or FPM |
| Body: | PVC: Socket ends for solvent welding PPH: Socket ends for fusion welding PTFE: BSPF |
| Ambient temperature: | Max. 50 °C |
| Fluid temperature: | Max. 50 °C |
| Viscosity: | Up to about 38 cSt |
| Protection: | IP 65 (connector fitted) or version EEXm II T4: on request |
| Connector: | Plug in socket DIN 43650, cable gland PG 9 |
BAMO EV160 pilot operated solenoid valve consists of a diaphragm, that opens or closes the flow, and a piston that controls the secondary circuit assistance to closure. The upstream pressure is used as against pressure to actuate the diaphragm at the closure of the main flow line.
The piston raised with the supply of the coil, releases the counter pressure, thus opening the flow line. These valves must always be installed on a pressurized pipe, with a ΔP of at least 0.3 bar.