Skip to content

GAD531 Level Detection Grease Water Separators

Brand: BAMO
  • Lead Time: 4~6 weeks
Categories: Oil Water Separator, Level Sensor
BAMO Mesures GAD531 Level Detection Grease Water Separators, ISME Malaysia
  • Monitoring of grease-water separators
  • Compact and economical model
  • Detection of grease layer thickness overpassed
  • Relay output; Changeover contact
  • LEDs signals and audible alarm
  • Alarm unit for monitoring of grease separators in conformity with EN 1825
Ask for Quotation
Main power supply:  230 V AC +/- 10 % ; 50/60Hz
Power consumption:  ~ 2 W
Housing protection:  IP65, according EN 60529
Operating temperature:  -20 to +60°C
Monitoring:  The device has an auto-diagnostic of measuring loop integrity (broken cable, short-circuit)
Signals and alarm:  Audible alarm (Buzzer)
Green LED for normal status
Yellow LED when alarm occurred and not yet reset
Red LED for alarming status
Control:  Through 1 push button for diagnostic test and alarm acknowledgement
Relay output:  1 Relay, 230 V AC, 3 A
Changeover contact; Potential free
Cabinet:  Housing: Polycarbonate; 120x80x55 mm; IP 65; Wall mounting
GP/10 – Grease layer probe (Only for use with an alarm unit GAD 531):
Materials:  PP, PE and stainless steel
Cable:  10 m long; Elastomer resistant to oils; 2-wire cable (2 x 1 mm²)
Max. length:  300 m (adding an extension with a junction connector)
Dimensions:  Ø 32 mm; Stem length: 200 mm
Protection:  IP 68 acc. EN 60529
Measuring principle:  Capacitive, high frequency
Operating temperature:  -20 °C to +60 °C

BAMO GAD 531 and probe GP/10 are designed for monitoring grease-water separators. The probe GP/10 detects when the thickness of floating greases over water, is greater than the permitted maximum thickness:

  • Yellow LED: Alarm occured, not yet reset
  • Green LED: Normal monitoring status
  • Red LED: Alarming status

The alarm unit has an auto-diagnostic of system integrity. A relay output and an audible alarm inform the operator. The buzzer may be deactivated with a simple jumper if necessary.

Components of one system:

  • Alarm unit GAD 531
  • Detector: Probe GP/10 (cable output, 10 m long)

Caution: Not suitable for the detection of greases in emulsion, or greases cured in aggregate

Datasheet