- Holder for 1 electrode
- Construction: in PVC
- Spigot ends Ø 25 mm for solvent welding
| Material: | PVC / Transparent PVC |
| Seal: | EPDM |
| Temperature: | 0 to 50 °C |
| Pressure limit: | Max. 7 bar at 20 °C |
| Fittings: | O.D. 25 mm spigot end, for solvent welding |
The BAMO PVC holder 9240 with suitable electrode allows in-line measurements of pH or ORP under pressure. For a pipe with a diameter greater than 25 mm, its installation must be done in a bypass, adding a pressure drop (restriction, elbow, valve, etc.) to ensure proper circulation of the liquid around the electrode. It is recommended to install valves, upstream and downstream of the bypass, to allow the easiest calibration and maintenance routines.
Note:
- An average flow rate limit to respect is max. 500 l/h.
- This probe can only be used with associated electrodes. Only electrodes with threaded fitting PG 13.5 can be mounted on this probe.