- Product registered with SPAN
- RS485 signal output
- Electrochemical conductivity sensor
- Stable data and good repeatability
- Strong anti-interference ability
- Fast response time
- Low maintenance cost
- Suitable for chemical, dosing plant, industrial processing water treatment plant, recycling water plant, and water supply network station
C400 Series Digital Residual Chlorine Sensor
| Measuring range: | 0 to 20 mg/L |
| Temperature compensation: | Manual or automatic temperature compensation |
| Temperature coefficient: | 2% per °C |
| Measuring temperature: | 0 to 50 °C |
| Flow rate: | 30 to 90L/h (The sensor should be used with the flow cell) |
| Calibration: | 2-point calibration |
| Sensitivity: | 78% to 155% |
| Power supply: | 12V DC |
| Communication: | RS485 (Modbus) |
| Dimension: | Diameter 13 mm, Length 178.5 mm |
| Sensor material: | 316 Stainless Steel shell |
| Signal cable length: | Standard 10 meter |
IUNI-21 Dual Channel Analyzer
| Display: | 160*160 LCD with backlight |
| Power supply: | AC: 85-500V AC, 50/60Hz DC: 9-36V DC (upon request) |
| Analogue output : | 3 x 4-20mA |
| Relay output: | 3 x relay output (programmed response parameters and value) |
| Communication protocol: | RS485 (Modbus) |
| Ambient temperature: | -20 to 70°C |
| Operation temperature: | -15 to 60°C |
| Protection: | IP65 / NEMA 4X |
| Device weight: | 1.35 kg |
| Device dimension: | 145 (H) x 125 (W) x 162 (D) mm |
| Enclosure: | PA66+GF25+FR (Cover); Aluminium alloy powder (Lower casing) |
| Parameter: | Residual chlorine |
The C400 series residual chlorine sensor applies the advanced principle of constant voltage to measure residual chlorine/chlorine dioxide in water. This method utilizes a stable potential between the polarized electrodes and reference electrodes at certain different current intensities. The sensor’s reading is measured in the concentration unit by analyzing the current signal.
The C400 sensor is simple in structure. Replacement of membrane and reagent of the electrode is not required during maintenance.
The IUNI-21 dual channel analyzer is an effective option that can connect two digital residual chlorine sensors at the same time to reduce the cost of transmitter and installation space:
- Field mounted dual channel analyzer with datalogger
- Connect two sensors at one time
- 4-20mA output
- Relay output
- Communication, RS485 (Modbus)
- LCD visual display
- User-friendly and attractive operating interface
Price is indicative, consisting of 1 x IUNI-21 Universal Transmitter,1 x C400 Digital Residual Chlorine Sensor and a flow cell.
This product is registered with SPAN.