Skip to content

LAS Resistivity Monitor

Brand: BAMO
BAMO Mesures LAS Resistivity Monitor, ISME Malaysia
  • Expanded scale from 0 to 2 MΩ.cm
  • Output: Changeover contact
  • Audible alarm, adjustable setting
Measuring range:  0 to 2 MΩ.cm, expanded scale centered on 100 kΩ.cm
Alarm:  Audible alarm and red light on the front
Output:  Changeover contact
Switching power:  5 A – 250 V AC; 5 A – 30 V DC
Housing:  In ABS – 80 x 160 x 55 mm
Power supply:  230 V AC – 50 Hz (1.5 m long cable included)

BAMO LAS resistivity monitor indicates permanently the resistivity value. The alarm sounds each time the resistivity is lower than the pre-set value; it reset only when the resistivity is back to a greater value. The scale 0 to 2 MΩ.cm is expanded to allow a comfortable reading from 20 to 500 kΩ.cm with a centered value at 100 kΩ.cm bringing safe information. The instrument is convenient for monitoring demineralizating systems anions/cations, without automatic control.

Associated probes: BAMO probes with cell factor 0.1 are suitable (data-sheet 360-01), however the probe BC 1425/BNC – R ¼” is particularly convenient. However the probe BC 1425/BNC – R ¼” is particularly convenient; cable poutput (5 m long) with BNC connector.