Maximat CX Compact Overfill Detector
Brand: BAMO
- Lead Time: 4~6 weeks
Categories: Leakage Monitoring Level Indicator
- All-plastic versions
- Integrated transmitter and connection for test button
- No moving parts
- For storage tanks
- NPN / PNP interface
| Detection: | Capacitive high-frequency sensor, fail-safe detector |
| Ambient temperature: | -20 to +60 °C |
| Operating pressure: | Atmospheric; Limits: 0.8 to 1.1 bar |
| Housing head: | PBT, fibre-glass reinforced |
| Protection: | iP65 according to EN 60 529 |
| Fittings: | Refer to datasheet |
| Power supply: | 15 to 27 V DC |
| Consumption: | < 1 W |
| Outputs: | Potential-free Reed contact for low voltage (Normally Closed, it opens when alarm occurs) – Rated: Max. 50 V AC / DC, Max. 0.5 A, Max. 10 VA, convenient for operating with a coupling relay or PLC, signaling device TC4 / TC1 or CST unit. 2-wire alarm output reporting with transmitter MAXIMAT SHR C Note: Simultaneous use of both outputs is not possible. |
| Terminals: | Screw terminals, cable max. 2.5 mm² |
| Additional function: | Connection of an external test button (potential-free contact), for a complete diagnostic of the device integrity (connection loops, electronics). |
| Connection options: | Alarm units: MAXIMAT TC1 / TC4 Coupling relay: CST Transmitter: MAXIMAT SHR C Automation with PLC |
BAMO Maximat CX compact overfill detectors are level limit switches that are used to prevent overfilling of containers with water-polluting liquids. When an electrically conductive liquid comes into contact with the detector stem, the integrated electronics respond by interrupting the continuous output signal. This signal can be read out from the system controller as acoustic and optical alarms and, if required, can be used to cause an emergency shutdown of the filling process.