| Main power supply: | 230 V AC ± 10%, 50/60 Hz or 24 V DC ± 10% |
| Power consumption: | About 3 VA / 3 W |
| Ambient temperature: | -20 to +60° C |
| Housing: | 22.5 x 75 x 110 mm, IP 40 for standard rail per DIN EN 50 022 (35 x 7.5 mm top-hat rail) |
| Terminals: | Screw terminals, IP 20 maximum wire cross-section 2.5 mm2 |
| Relay outputs: | 2 floating changeover contacts, maximum 250 V (50/60 Hz) 3 A or 115 V DC, 0.5 A |
| Minimum load: | 10 mA at 5V DC |
| Indicators: | Green LED operation Green LED relay pulled in Red LED overfill/leakage alarm Red LED interrupted circuit Red LED short-circuit |
| Delay time: | Release delay adjustable from 0.3 to 3 sec |
| Measuring circuit: | 12 V DC maximum Short circuit 110 mA maximum Inductance Capacitance < 0.5 μF maximum |
| Measuring cable: | 300 m maximum, wire cross-section 0.5 mm2 minimum |
BAMO Maximat SHR CS measuring transducer is designed for for Maxitop and Maximat series overfill and leakage sensors. It is a power supply and alarm signal relay SHR CS (DIN rail mounting) that assures a continuous survey of the measurement loop, a LED indicates the circuit status. The alarm signal drives 2 output relays to control 2 separates systems such as a horn and a flashing light.