- Wet parts in plastic materials
- For aggressive and conductive liquids
- Fail safe; Auto-diagnostic with SHR relay
- Fitting: Adjustable depth
| Main power supply: | 15 to 27 V DC |
| Power consumption: | < 1W |
| Ambient temperature: | -20 to +60 °C |
| Operating pressure: | Atmospheric (0.8 to 1.1 bar) |
| Stem: | HD-PE, O.D. 40 mm |
| Fitting: | PVC, BSP 2”, sliding coupling for depth adjustment |
| Trigger point distances (L): | 500, 700, 900 mm |
| Head housing: | PBT, fibreglass reinforced, IP 65 according EN 60 529 |
| Connectors: | Screw terminals, wire Max. 2.5 mm |
| Input: | For external button switch to test the complete system |
| Signaling display: | Green LED on the terminals board |
| Output: | Reed contact, potential free, for low voltage Rated: 50 V AC/DC; 0.5 A; 10 VA |
BAMO Maxitop compact overfill sensor monitors the overfilling of a tank with electrically conductive, non-flammable liquids, even highly aggressive liquids. Example : Storage tanks for caustic soda (NaOH), hydrochloric acid (HCl), etc.
Maxitop is designed to prevent overfilling of tanks. It detects conductive liquids (acids, alkalis) with a reactance below 5 kOhm and a coupling capacitance towards ground of more than 50 pF. In no case should liquids form insulating or conductive deposits.
Maxitop has 4 different possible transmissions:
- Direct connection to a 4 channels alarm unit Maximat TC4 or 1 channel unit Maximat TC1
- Direct connection to a PLC
- For relay output and loop diagnostic with a Maximat SHR
- For relay output with a Maximat CST
With its integrated positive safety converter, the Maxitop is ideal to give an alarm before the overfilling of a tank. Convenient to use with any electrically conductive, non-flammable liquids; even highly aggressive liquids.