- Capacitance detection loop
- For aggressive and conductive liquids
- Fail safe; Auto-diagnostic with SHR relay
- Wet parts in plastic materials
- Safe: electrode has no contact with liquid
| Power supply: | 15 to 27 V DC |
| Consumption: | < 1W |
| Operating pressure: | Atmospheric 0.8 to 1.1 bar |
| Probe: | HD-PE, O.D. 40 or 25 mm |
| Suspension cable: | Shielded cable, PVC sheath, standard length 6 m, 5-wire, 0.34 mm² |
| Head housing: | PBT, fibreglass reinforced, IP 65 according EN 60 529 |
| Connectors : | Screw terminals, wire Max. 2.5 mm² |
| Input: | For external button switch to test the complete system |
| Signaling display: | Green LED on the terminals board |
| Output: | Reed contact, potential free, for low voltage Rated: 50 V AC/DC; 0.5 A; 10 VA |
| Hysteresis: | About 2 mm |
| Switching contact: | Liquid height Min. 5 mm |
BAMO Maxitop LW C is designed to detect conductive liquids with a reactance up to 5 kOhm/cm and a coupling capacitance towards ground of more than 50 pF. The liquids may not generate electrical insulating or conductive deposit.
The Maxitop LW C has 4 different possible transmissions:
- Direct connection to a 4 channels alarm unit Maximat TC4 or 1 channel unit Maximat TC1
- Direct connection to a PLC
- For relay output and loop diagnostic with a Maximat SHR
- For relay output with a Maximat CST
With its integrated positive safety converter, the Maxitop is ideal to give an alarm when a leakage occurs in a double wall tank or retention basin. Convenient to use with any electrically conductive, non-flammable liquids, even highly aggressive liquids.