- Detection of level for liquids
- Continuous monitoring
- Operating even with turbulences
- Unnecessary calibration routine
- Operating even with suspended solids
| Insertion length: | 69 or 125 mm (from sealing surface) | ||
| Material: | AISI 316 Ti | ||
| Fitting: | 1“ BSP | ||
| Liquid temperature: | -40 to 130 °C (refer to datasheet for temperature limits diagrams) | ||
| Ambient temperature: | -40 to 70 °C (refer to datasheet for temperature limits diagrams) | ||
| Liquid pressure: | Max. 40 barg (refer to datasheet for pressure vs temperature diagram) | ||
| Liquid S.G.: | ≥ 0.7 | ||
| Viscosity: | ≤ 10,000 mm²/s (cSt) | ||
| Supply / Output: | 1) 12 to 55 V DC / DC, 3-wire, PNP or NPN 2) 20 to 255 V AC / AC, 2-wire |
||
| Consumption: | AC: Depending on connected load / DC: < 0.6 W | ||
| Electrical connections: | DIN Connector | ||
| Electrical protection: | AC version: Classe I / DC version: Classe III | ||
| IP protection: | IP 65 | ||
| Mass: | 0.5 kg | ||
BAMO Nivaswitch is a vibrating fork liquid level detector. It is mainly used for overfill protection, leak detection or dry run protection of pumps.
Nivaswitch is easy to use and can detect most liquids. It works independently of electric conductivity, clogging, turbulences, flow-rate and air bubbles. The trigger point depends of the immersion depth.
Robust and compact, Nivaswitch may be mounted vertically or horizontally Easy to install, it does not require maintenance. Status of output is indicated by a bi-color (LED) and a function test is performed with a magnet
The alternative current output or digital output (NPN or PNP) can be connected to a PLC. As an option, the relays PKK or LC1, allow to convert the output as a potential free contact signal.