- For clear water or sea water
- Highly resistant to surfactants
- Temperature : up to 45 °C
- Pressure: up to 1 bar
| Measured parameter: | Ozone |
| Applications: | Water treatment (quality of drinkable water), sea water, R.O. produced water ( >10 μS/cm ) e.g.: Bottles disinfection, CIP etc. Surfactants: Tolerated |
| Measuring system: | Closed cell with 2 electrodes and electrolyte |
| Supply voltage: | 12 … 30 V DC (Load: 500 to 900 Ω) |
| Output signal: | 4-20 mA, screw connectors x2 (1mm²) No galvanic insulation |
| Operating temperature: | 1 to 45°C Automatic temperature compensation |
| Operating pressure: | 0.5 bar without retaining ring 1 bar max. with retaining ring (No vibrations; No pulsating flow) |
| Flow rate: | About 15 to 30 l/h |
| pH operating range: | pH 4 to 9 |
| Zero adjustment: | Not necessary (from factory) |
| Slope calibration: | Only 1 point with BAMOPHAR 194 |
| Calibration: | DPD-4 method (DPD-1 + DPD-3) and record results on the BAMOPHAR 194 in the CALIBRATION menu |
| Materials: | PVC-U and AISI 316 Ti (1.4571) |
| Protection rate: | IP65 |
| Dimensions: | O.D. 25 mm, length 220 mm (4-20 mA) |
BAMO OZ10.1 ozone sensor is suitable for water treatment (water equivalent to drinkable quality) and sea water (Examples: Bottles cleaning, CIP, etc.).
