- Electrode holder and protector
- Built-in temperature sensor Pt100
- Easy calibration routine
- Adjustable flange or PE collar fitting
- For any electrode PG 13.5
- PVC construction
- Cables: through 2 pressure glands
| Immersion depth: | 200 mm, as a minimum |
| Temperature sensor: | Built-in Pt100 Ohm at 0°C, 3 wires |
| Probe length: | Standard 1 m (from 500 to 3000 mm on request) |
| Construction: | PVC |
| Head: | PBT fiber glass reinforced; IP 65 |
| Cable output: | Two PG 9 |
| Fitting: | Adjustable flange 9358 or PE collar for tube O.D. 50 mm |
| Operating temperature: | 55 °C, as a maximum |
| Recommended cable: | Temperature, 3 wire type, shielded, 0.22 mm² pH, coaxial cable type 9060 |
The BAMO immersion probe holder 9337 is convenient for pH or ORP measurements in tank, drain, basin, open channel and when the temperature is important in the process. Standard construction is of PVC tube diam. 50 mm. The probe is designed to avoid electrode damaged during calibration. Electrode protection end is removable from the holder. Buffer flasks (9011/ 9012/ 9013/ 9015) grip on the holder during the calibration routine.
There is no need to hold the probe during these operations. Probe and flask can stand on floor. The electrode is not removed, no risk to break it.
Note: This probe can only be used with associated electrodes. Only electrodes with threaded fitting PG 13.5 can be mounted on these probes.