- Protection holder
- Easy calibration routine
- For 1 electrode (fitting PG 13.5)
- Unscrewable protection end
- In AISI 316 L
| Immersion height: | 1000 mm (from 200 up to 3000 mm on request) |
| Construction: | AISI 316 L |
| Cable output: | 1 Cable gland M10, centered on tri-clamp fitting or 1 Cable gland PG 16 for two cables, with aluminum head housing |
| Fitting: | AISI 316 L flange (fixed) (Other fittings on request) |
| Option: | Temperature sensor Pt 100 Ω at 0 °C, 3-wire |
The BAMO immersion probe holder 9337 insures positioning and protection of electrode in basins and tanks; it allows an easy calibration routine with low risks to break the electrode. Standard construction is of AISI 316 L. Fitting on site is done with a fixed flange (AISI 316 L) welded on the extension tube. Cable passes through a cable gland fitted on a clamp connection, or on a head housing in aluminum alloy
Note: This probe can only be used with associated electrodes. Only electrodes with threaded fitting PG 13.5 can be mounted on these probes.