- Intrinsic safety relay
- Galvanic insulation
- Protection for 1 contact or proximity sensor
- Change over relay output
| Power input: | 230 V AC ±10 % (48 to 62 Hz) 24 to 48 V DC ±10 % Signaling: green LED on front panel |
| Consumption: | ≤ 4,5 VA or 1.6 W |
| Input signal: | (From Hazardous area) Potential free contact Or proximity sensor 2-wire (NAMUR standard) Impedance line: 1 kΩ max. |
| Housing: | IP40 cabinet |
| Output signal: | (To safe area) |
| Contact output: | Voltage free output max.: 250 V; 5 A; 100 VA |
| Response time: | ≤ 20 ms |
| Switching frequency: | 10 Hz max. Signaling: Red LED on front panel (when relay is actuated) |
| Galvanic insulation: | Input/ Output/ Mains supply: 2500 V AC; 50 Hz |
| Case: | ABS case |
| Mass: | 200 g |
| Storage temperature: | -25 to +70 °C |
| Operating temperature: | -20 to +60 °C |
| Relative humidity: | 5 to 95 %HR, no condensing |
| Connections: | Plug-in clamp terminals |
| Mounting: | DIN rail EN 50022 |
| Set up: | Input and function by DIP switches |
BAMO RDN11 is an intrinsic safety relay with galvanic insulation. It is designed to relay an ON/OFF signal from a contact or proximity sensor (DP) located in hazardous area to the safe area.