| Measuring height: | From 250 mm up to 2,000 mm (Refer to datasheet) |
| Temperature: | PVC: 0 to +50 °C PPH: 5 to +80 °C PVDF: 0 to +100 °C AISI316L: -10 to +110 °C |
| Pressure limit: | 1 bar max. at 20 °C for plastic versions 20 bar max. at 20 °C for AISI 316L version |
| Stem and fitting: | PVC, PP, PVDF, or AISI 316L |
| Float: | PP, PVDF, or AISI 316L |
| Head housing: |
PBT for plastic versions, IP65 Aluminum for AISI 316L version, IP65 |
| Resistor output: | from * xΩ to 10 kΩ |
| 2-wire transmitter: | 4-20 mA; Power supply: 13 to 30 V DC |
| Accuracy: | By steps of 10 mm (resolution) |
BAMO RTM transmitter consists of a Reed chain (Reed contacts connected by resistors) switching when magnetic float passes in front. The resulting resistor value is directly in correspondence with the level. The necessary magnetic field is created by the MNR6 / MNR7, Magtop floats or SFA counterweight. The T2F transmitter in the head converts the resistor value into a 4-20 mA signal.
Manufactured according to the application; Installation and commissioning are simplified on-site (factory calibration). The RTM may be connected to a Bamowiz or to an ITU unit for measurement display.