- Continuous monitoring of flow rates on cooling, lubricating systems, and more
- For flow controllers: BV, CDA, DUM and DKM
- Output: 4 to 20 mA or 0 to 10 V
- Accuracy: ±10 % FS
- Already set in factory
| Analog output: | 4 to 20 mA or 0 to 10 V (max. 600 Ω) |
| Power supply: | 24 V DC (19 to 30 V DC) |
| Consumption: | Max. 10 mA / 1 W |
| Accuracy: | ±10 % F.S. |
| Ambient temperature: | -20 °C to +70 °C |
| Operating temperature: | -20 °C to +80 °C |
| Material: | Aluminum (blue, anodized) |
| Protection: | IP 65 |
| Connection: | M12 connector, 5 pins (included) |
BAMO SIG 4.0 analog transmitter works on the principle of Hall effect. It detects the position of the magnetic diver or orifice plate of the controller and delivers a signal proportional to the flow rate. SIG 4.0. is supplied fitted and secured on the flow controller, already set up.
Note: Refer to flow controller specifications for mounting recommendations. The SIG 4.0 transmitter must not be removed from the flow controller.