- PT100 ohm and resistance input
- 2 wires programmable transmitter
- Programmable by computer
- 4-20mA or 20-4mA
- SI EEx ia IIC, T1-T6 in option
| Power supply: | Non EEx: 8.0 to 35V; EEx: 8.0 to 28V |
| Internal consumption: | 25mW to 0.8W |
| Probe current: | >0.2 mA, <0.4mA |
| Accuracy: | ±0.3% |
| Power outage: | 8Vdc |
| Response time: | From 0.33 to 60s |
| Temperature factor: | <±0.01% EC/°C |
| Linearity error: | <0.1% EC |
| Power supply effect: | <0.005% EC/Vdc |
| Line resistance (3 wires): | <100°C temperature |
| Factor (RDT): | ±0.01°C / ambient T° |
| CEM data immunity effect: | <± 0.5% EC |
| Temperature calibration: | 24°C ± 4°C |
| Input max difference: | 50% of max value |
| Tightness (box/terminal): | IP68 / IP00 |
| Wires max section: | 1 x 1.5 mm2 |
| Max line resistance (per wire): | 10 Ohm |
| Weight: | 50g |
EC = Calibrated scale
Temperature linear measure with resistance sensor, Pt 100, Pt 1000, Ni 100. Resistance conversion to a standard 4-20mA signal (RTM).
With ohmic input, it is possible to make a 60 points linearization from customer specification (specially for RTM). To avoid lost or modification of data, in case of power outage, calibration data are saved in a EEPROM.
T2F5333 is delivered with configuration required by the final user.