- Measuring range from 10 μS/cm up to 2000 mS/cm
- Construction: PEEK
- Wide chemical compatibility
- Temperature max. 125 °C
- Low fouling probe
- Built-in Pt100 sensor
- Applications where high chemical resistance or high operating temperature are necessary:
- WWTP survey
- Concentration monitoring of acid and base (e.g.: NaOH, HNO₃, H₂SO₄)
- Quality survey of chemicals in tank or pipeline
- Phase separation of mixture liquid/liquid
| Measuring range: | Conductivity: 10 μS/cm up to 2000 mS/cm |
| Cell constant: | c = 1.98 cm⁻¹ |
| Probe material: | PEEK |
| Seal: | FPM |
| Fitting: | 3/4” BSP |
| Ambient temperature: | –10 to +70 °C |
| Liquid temperature: | -20 to +125 °C |
| Temperature sensor: | Built-in Pt 100 sensor (Class A – acc. IEC 60751) |
| Pressure: | 20 bar max |
| Protection: | IP 67 (NEMA 6) IP 68 with immersion probe holder |
| Output cable version: | 5 m long cable |
BAMO TCL S50 probe is well adapted for measurement between 10 μS/cm up to 2000 mS/cm. It uses inductive measurement that offers many advantages. There is total galvanic insulation between the measuring loop and the liquid for reliable measurements on numerous chemicals.
The construction material, PEEK, allows a wide range of chemical compatibilities and a long lifespan. TCL S50 probe may also work at high temperatures up to 125 °C. The TCL S50 probe can be used with Bamophar 364 monitor.
- Immersion measurement: The probe is fixed to end of probe holder for immersion, length from 500 to 2000 mm, with optional flange fitting.
- On-line measurement: Probe is mounted on a Te, ND 50 mm.