- Holder for 1, 2 or 3 pH/ORP electrodes
- Construction: PVC or PPH
- Process fitting: Union DN 20, diam. 25 mm
| Material: | Body: PVC – Unions ND 20, diam. 25 mm, for solvent welding Body: PPH – Unions DN 20, diam. 25 mm, for welding (Flanged fittings on request) |
| Seals in FPM: | O-ring seals 63.09 x 3.53 and 26.2 x 3.6
(EPDM seals on request) |
| Operating temperature: | 0 to 50 °C for PVC model 0 to 90 °C for PPH model |
| Pressure limit: | 6 bar |
The BAMO 9200 series holders allows pH, ORP and/or temperature in-line measurements (flow through cells). They are designed to receive measuring electrodes with a fitting PG 13.5. Choice of materials should consider chemical compatibilities and operating conditions of the application.
Mounting: The inlet of fluid is lower than the outlet in order to maintain the electrode in immersion in the liquid.
For pipes with a diameter greater than 25 mm, installation must be done as a bypass, adding a pressure drop (restriction, elbow, valve, etc.) in order to ensure a correct circulation of liquid around the electrodes. It is recommended to provide valves, upstream and downstream, to have at any time, comfortable calibration and maintenance routines.
Note: This probe can only be used with associated electrodes. Only electrodes with threaded fitting PG 13.5 can be mounted on these probes.