- Compact and robust construction
- Output signal: 4-20 mA; 2-wire
- Pressure: 0 to 2.5 barg up to 25 barg
- AISI 316 Fitting: ½” G or ¼” G
- Ceramic diaphragm
| Range: | 0 to 2.5 up to 0 to 25 barg |
| Overload limit: | 2.5 times the full scale |
| Accuracy: | ±0.5 % F.S. (Inclusive: variations on zero point, end of range, linearity, hysteresis and repeatability) |
| Response time: | < 2 ms |
| Fluid temperature: | -15 to +125 °C |
| Ambient temperature: | -30 to +85 °C |
| Temperature incidence: | ± 0.2 % F.S. / 10 K Test conditions: At 25 °C |
| Output signal: | 4 to 20 mA |
| Power supply: | 7 to 33 V DC, 2-wire loop Protected against short circuit and reverse polarity |
| Isolation voltage: | 500 V DC |
| Electric protection: | Class III |
| Connections: | Connector DIN; EN 175301-803-A Cable Ø 6 to 8 mm |
| Protection: | IP 65 (connector DIN mounted) |
| Body and fitting: | AISI 316 L (1.4404) |
| Seal: | FPM |
| Sensor: | Piezo-resistive with ceramic diaphragm Al₂O₃ (96 %) |
| Connector: | Polyamide 50 % GF UL 94 V-0 |
| Fitting: | Male threads: G ¼” or G ½” |
| Mounting position: | Vertical, connector upward (recommended) |
BAMO TP805 pressure transmitter is used for pressure measurements, continuously in real time, of gases and liquids. Accuracy, reliability, corrosion resistance and mechanical load upper limit, make this top quality pressure transmitter a suitable product for a wide variety of industrial applications.
TheTP805 transmitter is based on a piezo-resistive sensor for which the ceramic diaphragm fits a stainless steel body to resist to aggressive chemicals. Materials in use and the technology implemented make this sensor particularly resistant to vibrations and mechanical shocks.
Commissioning is easy and fast. The pressure transmitter is factory adjusted to its measuring range and can not be modified on site. It does not require maintenance.