- Compact transmitter, 4-20 mA output
- In conformity with EN ISO 7027, infrared light (860 nm), 90° scattered light
- Selectable ranges:
- 0 to 50/ 100/ 200/ 500 / 1000/ 2000 FTU
- High resolution from 0.01 FTU
- Max immersion depth: 10 m
| Output signal: | 4-20 mA Example: Connection to a BAMOWIZ or an analogue PLC input |
| Power supply: | 10 to 30 V DC, galvanically isolated from measuring circuit |
| Consumption: | Note: When the 4-20mA loop is powered by the connected monitor or PLC, the connected load increases by 0.48 W: 24 x 20 = 0.48 (24 V DC; 20 mA; 0.48 W) |
| Ambient temperature: | 0 to +45°C |
| Probe protection: | IP 68, max. depth 10 m (EN 60 529) |
| Cable: | TPK, length 6m (special lengths on request), connection to head housing via a watertight connector (IP67). Resistant to highly diluted acids and alkalis |
| Liquid temperature: | 0 to +60°C |
| Probe body: | PVC |
| Selectable ranges: | 0 to 50 / 100 / 200 / 500 / 1000 / 2000 FTU FTU= Formazin Turbidity Units |
| Accuracy: | ±5% of reading ±1% F.S. in use |
| Resolution: | Or 0.01 FNU or 1 FTU according to the measuring range |
| Color compensation: | Color compensation in the measuring ranges 50 and 100 FTU |
| Head housing: | PBT, IP 65 (EN 60 529) |
| Fitting: | 2” BSP male; With counter-nut and angle bracket |
| Display: (integrated to the head) |
4 Digits for current turbidity and settings Status LED for alarm signals |
| Settings: | Rotating potentiometer/ push button |
| Option: | Test kit for a quick check of the device |
BAMO Turbisens is an immersion turbidity transmitter, designed for measuring the turbidity – content of solid particles (ie. suspended particles) in open basins or channels. Turbisens optically measures the turbidity of the liquid. The measurement system complies with standard NF EN ISO 7027 (Nephelometry) The electronics integrated into the head converts the measurement into a 4-20 mA signal.
Control and monitoring of:
- Wastewater treatment plant outlets
- Sedimentation process
- Wells
- Cooling water basin
