- Mounting in all positions
- Construction: cast iron or stainless steel
- For pipes from DN 40 up to 300 mm
- Scale amplification from 2 to 10
- Accuracy: ± 2.5 %
- Optional: High or/and Low flow switches (on request)
| Measuring range: | 1 to 1600 m3/h [Water at 20°C] 180 to 200 000 Nm3/h [normo m3/h of air] |
| Accuracy: | ± 2.5% full scale |
| Repeatability: | ± 0.5% reading |
| Scale amplification: | From 2 to 10 – Linear scale |
| Temperature limits: | 0 to 90°C, sealing in Buna 0 to 120°C, sealing in FPM |
| Pressure limit: | 21 bar as a maximum |
| Wetted parts: | Cast iron and brass (standard) Stainless steel 316 (on request) |
| Diaphragm: | Stainless steel 316 |
| Flow indicator: | Borosilicate glass tube |
| Diver: | Stainless steel 316 SS (liquids) Aluminium (gases) |
| Thrusts: | Stainless steel 316 |
| Sealing: | O-rings in Buna N as standard; FPM on request |
| Options (on request): | |
| Alarm contacts: | (low or high flow rate) |
| Inductive contact: | Mono or bi-stable |
| Operating temperature: | Ambient from -25°C to 60°C |
| Protection: | IP 67 |
| Protection relay: | Relay S112A |
BAMO U6 orifice plate flow indicators are specifically designed for the measurement of high flow rates. They are suitable for pipes with a diameter equal or over 2″. The direct reading is done on a variable area flow meter. For an optimal accuracy, the diaphragm characteristics are calculated against the process parameters.