Flow Verification Service Archives | ISME Process Instrument & Control System Malaysia

Tag: Flow Verification Service

Annual Flow Verification Services, ISME Malaysia

March 27, 2026

Annual Flow Verification For Highway Rest Area Sewage Treatment Plant (STP)

Our Technical Team has been on the go recently to conduct annual flow verification services for ultrasonic open channel flowmeters at rest area (R&R) sewage treatment plants (STP) along the west coast highways.

Flow Verification Service for Waste Management Facility Negeri Sembilan

December 31, 2025

Planning A Yearly Flow Verification Service Strategically

Yearly I-SYSTEM flow verification is important because it ensures flowmeters continue to operate at optimum condition, in line with operational, ISO audits and regulatory expectations. Over time, accuracy of a

During the flow verification, we ensure that the flow sensor is installed in the flow stream at a location where there is no disruption of steady flow by upstream or downstream blockage. Sensor height is adjusted to achieve optimal result.

September 25, 2024

Flow Verification and Calibration Services for Port Facility

Our technical team conducted a replacement and verification service for the pH sensors and the ultrasonic flow meter at a port in Perak.

July 31, 2023

Flow Verification Services for Waste Management Facility

Recently, Team ISME conducted a flow verification service at an industrial waste management facility in Negeri Sembilan.

Flow Verification Service for R&R Sewage Treatment Plant

June 20, 2023

Flow Verification Services for Rest Area Sewage Treatment Plant (STP)

Our Technical Team has been on the go last week to perform flow verification services at several rest area (R&R) sewage treatment plants (STP).

I-SYSTEM UOL Open Channel Flow Meter, ISME Malaysia

March 7, 2023

T&C UOL Ultrasonic Open Channel Flow Meter

Recently, our Technical team conducted a T&C for the I-SYSTEM UOL Ultrasonic Open Channel Flowmeter at a STP.

Flow verification service to ensure that flowrates are accurate comparing against the discharge table for V-Notch flume.

June 13, 2022

Flow Verification For Rest Area Sewage Treatment Plant

A series of flow verification services are carried out for open channel flow meters at rest area (R&R) sewage treatment plant (STP) along the highways running through the west coast of Peninsular Malaysia.

Onsite flow verification service for open channel flow meter with a parshall flume configuration at a paper mill in Selangor.

June 23, 2021

Flow Verification Service for Paper Mill

A flow verification service is carried out for electromagnetic flow meters and open channel flow meters at a paper mill in Selangor, Malaysia.

I-SYSTEM flow verification service for electromagnetic flowmeter at bleaching earth manufacturer in Johor.

June 23, 2021

Flow Verification for Bleaching Earth Manufacturer

A flow verification service is carried out for bleaching earth manufacturer in Johor, Malaysia.

Flow verification service of effluent flowmeter at a WWTP for automotive factory in Melaka.

October 15, 2020

Flow Verification Service for Automotive Factory

A flow verification service is carried out for an automotive factory in Melaka, Malaysia. End user required solution for measuring consistency of flow within pipe repeatedly over a period of time.

August 14, 2020

Verification Service for Building Management System (Chiller)

A flow and temperature verification service is carried out for 9 commercial buildings located in Kuala Lumpur, Malaysia.

July 13, 2020

Flow Verification Service for Food Processing Plant

A flow verification service is carried out for an international food processing plant in Negeri Sembilan, Malaysia.

July 2, 2020

Preventive Maintenance with Flow Verification Service

Accuracy and consistency are pivotal requirements for the data of flow instrument measurement.