Orifice Plate Flow Meter Working Principle
Orifice plate flow meter is a type of differential pressure flow meter that is commonly used in clean liquid, gas, and stream mass flow measurement.
Category: Product Recommendations
Measuring Temperature with Resistance Temperature Detector (RTD)
Industrial temperature transmitter measures temperature through sensors like Resistance Temperature Detector (RTD).
Variable Area Flow Meter Compatibility Based on Industrial Process Medium
Variable area flow meters are selected based on the compatibility between the process medium and the meter’s construction materials, since factors such as corrosion, temperature, pressure, and medium cleanliness directly affect performance and lifespan.
Excitation Coil Resistance as a Key Diagnostic Tool for Electromagnetic Flow Meter (EMF)
Inside every EMF sensor, energised excitation coils generate the magnetic field to produce a flow signal. Monitoring excitation coil resistance is a simple yet powerful method for verifying the health of an electromagnetic flow meter.
Monitoring Water Quality for Aquaculture and Fisheries
Monitoring optimal water quality is critical for the health, growth, and survival of aquatic organisms in aquaculture and fisheries. Key parameters such as dissolved oxygen (DO), pH, temperature, turbidity, salinity and ammonia.
Common pH Measurement Challenges in Industrial Processes and How to Overcome Them
pH measurement plays a vital role in industrial applications, supporting stable chemical dosing, efficient treatment performance, and consistent regulatory compliance.
Key Factors to Consider When Selecting an Electromagnetic Flow Meter
Selecting the right electromagnetic flow meter is essential to ensure accurate measurement, long service life, and reliable operation.
Pneumatic vs Electric Actuated Ball Valves: Key Differences and Application
Ball valves are widely used in industrial piping systems for on/off isolation and flow diversion. When automated, they are commonly actuated using either pneumatic or electric actuators.
Billing and Custody Transfer of Natural Gas with RMG Gas Turbine Meters
Natural gas is a key energy source for Malaysia’s manufacturing sector, supporting end consumers in industries such as food & beverage, chemical processing, metal fabrication, rubber manufacturing, machinery, etc.
Parshall Flume Configuration for Open Channel Flow Measurement
The Parshall flume is a fixed hydraulic structure developed to measure flow in irrigation channels, streams, storm water systems and effluent discharge in wastewater treatment. Named after its creator, Dr.
Flap-Type Flow Meters for Direct Indication of Flow
Flap-type flow meters are robust, economical devices that provide direct visual indication of flow rate in pipelines.
Thermal Mass Flow Meter for WWTP Energy Management
Thermal mass flow meters can be used for energy management by optimizing energy-intensive processes in WWTP such as aeration and biogas utilization.
Level Measurement for Diesel Fuel Tank
Accurate diesel fuel tank level measurement is essential for effective fuel management, inventory tracking, and operational efficiency. It helps prevent overfilling, fuel theft, and unexpected shortages while ensuring safety compliance.
Multipath Ultrasonic Gas Meter for Custody Transfer Metering
Ultrasonic gas meters have become the measuring instrument of choice for gas volume measurement in custody transfer because of its superior measuring accuracy, reproducibility, wide measuring range and low maintenance
120+ Years of Experience in Gas Measurement Technology by RMG
RMG Ultrasonic Gas Meter and Turbine Meter have been optimized, with numerous variants available for high-precision custody transfer metering and for low-cost in-house measurement for reliable process control. Natural gas,
Exclusive Distributor of Kirchner & Tochter in Malaysia, Singapore & Indonesia
We are glad to announce that ISME Sdn Bhd is now officially the exclusive distributor of Kirchner und Tochter products for Singapore, Malaysia, Indonesia. K&T is part of the BAMO
Measuring Dissolved Oxygen (DO) in Immersion Operation
The amount of dissolved oxygen (DO) plays an important role in water quality and the livelihood of aquaculture. DO refers to the total amount of oxygen currently present in the
Paddle Wheel Flow Meter for Solid Free Liquid
Paddle wheel flow meter uses the mechanical energy of liquid to rotate a paddle wheel in the flow stream. The rate of spin will be proportional to the velocity of
Parameters for National Water Quality Standards of Malaysia
The National Water Quality Standards (NWQS) for Malaysia use a range of physical, chemical, and biological parameters to assess water quality.
Mixed Liquor Suspended Solids (MLSS) in Wastewater Treatment
MLSS stands for Mixed Liquor Suspended Solids, which refers to the concentration of suspended solids in the aeration tank during the activated sludge process.
Coriolis Mass Flow Meter Working Principle
Coriolis mass flow meter is one of the popular option for metering mass flow rate and density of oil and gas applications.
Measuring Pressure with Smart Pressure Transmitter
Smart pressure transmitter measures pressure in various mediums (liquids, fluids, gases) and is designed for pressure monitoring and control applications.
Key Parameters of Wastewater / Sewage / Industrial Effluent Treatment
Monitoring of key parameters during the sewage / wastewater / industrial effluent treatment process is important to indicate water quality and to ensure that they are in compliance with standards set by the authorities.
Variable Area Flow Meter (Rotameter) Installation Guidelines
Rotameter is placed in between two sections of process piping by fittings. To prevent mechanical stress in the connecting pipes, the rotameter must be aligned in parallel and axial direction with the connecting pipe.
Before Installing An Electromagnetic Flow Meter
Electromagnetic flow meters can measure liquid such as sewage, paper pulp, slurry and mineral slurry which has an electrical conductivity greater than 5 μS/cm.
Dissolved Oxygen Sensor Installation Guidelines
Accumulation of air bubble around the dissolved oxygen sensors will cause inaccuracy or inconsistency in readings in aeration tanks.
Leak Localization and Detection for Data Centers
Sensing cables and floor leak detectors are designed to detects the presence of water, triggers an alarm, and pinpoints the location of the water.
Continuous Level Measurement with Hydrostatic Level Sensor
Hydrostatic level sensor is suitable for pump controls for wells and wastewater treatment plants, level measurement in a water reserve, and much more.
V-Notch Weir for Open Channel Flow Measurement
V-Notch weir is an effective way to measure cleaner effluent for open channel flow measurement, eg. industrial discharge and sewage treatment plant effluent.
Measuring Dissolved Oxygen with Optical DO Sensor
DO sensor are commonly used for field sampling and long-term monitoring applications along with DO meter, analyzer or control system. Optical DO sensors is called luminescent DO sensors or fluorescent sensors.
Differential Pressure Measurement Applications
A differential pressure sensor indicates the difference between two pressure points within a process, such as the inlet and outlet of a pump.
Combination pH Sensor for Industrial Processes
pH measurement is important in industrial applications like chemical processing, pharmaceutical, manufacturing, food production etc.
Gas Volume Measurement (Volumeter) in Industrial Applications
A gas turbine meter (volumeter) is commonly used in various industrial and commercial applications to measure the flow volume of nature gas and other gases.
Transit Time Ultrasonic Flow Meter for Energy and BTU Monitoring
Ultrasonic flow meter with thermal energy module is commonly used to measure the amount of energy generated and consumed in chilled and hot water for HVAC system; or energy management system in commercial buildings.
Floor Surface Leakage Detector for Containment Areas
Chemical or water leakage can occur either by accident, negligence or incompetence. Industrial incidents like this cause damage to the storage facility and negatively impact the health and safety of employees.
Usage of Steam for Industrial Process Efficiency
Steam is one of the most efficient and widely used energy sources for heating, drying, sterilizing, power generation, etc.
Non-Intrusive Flow Measurement with Clamp-on Ultrasonic Flow Meter
Clamp-on ultrasonic flow meter is a non-intrusive option for flow measurement and ideal for retrofit; or when cutting into the pipe and plant shutdown are not allowed.
Paddle Wheel Flow Meter for Instantaneous and Totalizer Flow
Paddle wheel flow meter is commonly used for industrial applications ie water distribution, water treatment, filtration, chemical batching or dispensing, process control, etc.
Turbidity, Effective Indicator of Water Quality Change
Turbidity is often closely correlated to surface water conditions and changes in turbidity are therefore indicators of changes in water quality.
Easy Tank Level Monitoring with By-Pass Level Indicator
By-pass level indicator is suitable for measuring the level of aggressive liquids that emit hazardous vapours, or to protect the stored liquid from external atmosphere.
Working Principle of Vortex Flow Meter
Vortex flow meters use a principle called the Karman effect to measure liquids, gases and vapors. In fluid dynamics, a Karman vortex lane is a repeating pattern of rotating (swirling) vortices.
Conductive Electrode Level Switch For Point Level Detection
Conductive electrode level switches offer a simple and cost-effective solution for point level detection in industrial applications.
I-SYSTEM Multiparameter Water Analyzers
I-SYSTEM water analyzers allows a variety of water quality parameters to be monitored simultaneously.
Copper in Electromagnetic Coil: Effects on EMF Lifespan
One important factor that affects the lifespan of an electromagnetic flow meter is the material for the electromagnetic coil.
IBC Chemical Level Monitoring with Radar Technology
Installing a radar level sensor externally above the IBC tanks, is a non-invasive way to provide an automatic and continuous level measurement.
Diaphragm Seals Working Principles
Diaphragm seals are used commonly to isolate and protect pressure measuring instruments from the process medium in chemical processing and extreme process applications.
Through-Air Radar Level Measurement
Radar level sensor technology transmits a high frequency radio wave (microwaves), and receives the wave reflected off the measured medium surface.
Measuring Air with Pitot Tube Flow Meter
Pitot Tube Flow Meter uses the differential pressure measurement principle, is suitable for measuring air and non-corrosive gasses.
Non-Contact Open Channel Flow Measurement
Open channel flow meter is commonly used to measure flow rates in irrigation channels, streams, storm water systems and wastewater processing for monitoring the effluent discharge.
Flow Meter for Small Flow Measurement
Small line and batch process operations are common in many industries, including water/wastewater treatment, food and beverage, pharmaceutical, and chemical processing.
pH Sensor Installation Guidelines
pH is one of the key metrics in water treatment, alteration in pH will affect the water quality, process efficiency and consumers’ safety.
Installation Requirements for an Electromagnetic Flow Meter
An electromagnetic flow meter is often a common choice for continuous measurement for water, effluent, sludge, slurries, pulp, pastes, beverages; and highly corrosive liquids (ie acids).
IoT Based Solutions for Industrial Processes
With the increased usage of Internet, the Internet of Things (IoT) is creating a vast network of interconnected assets with an aim of connecting processes.
Choosing the Right Chlorine Sensor for Chlorine Disinfection
Chlorine is a widely used disinfectant for the deactivation of pathogens in drinking water, swimming pool, wastewater and textile bleaching.
Prevent Overfill and Leakage in Storage Tanks
Severe incidents like leakage of toxic chemicals can threaten the surrounding community, wildlife and the environment.
Measuring Dissolved Oxygen (DO) in Water and Wastewater
The amount of DO plays an important role in water quality and the livelihood of aquatic plants and animals.
Ammonium Nitrogen (NH4-N) Measurement in Water and Wastewater
Ammonium nitrogen is an important parameter measured in milligram per liter, to indicate water quality in water treatment systems and facilities.
FLOWTECH KF700 Series Electromagnetic Flow Meters
An electromagnetic flowmeter does not have any moving parts and is ideal for water and wastewater applications with conductive medium.
Limit Switch for Variable Area Flow Meter
A limit switch allows operators to automate an industrial process without the need of the person-in-charge on-site.
Field Measurement Of Conductivity (EC) & Total Dissolved Solids (TDS)
Conductivity or electrical conductivity (EC) and total dissolved solids (TDS) are frequently used as water quality parameters.
Ultrasonic Flow Measurement for Medium to Low Flow Range
Ultrasonic flow measurement with the method of transit-time differential is one of the most adaptable flow rate and volume measuring processes.
Inline Transmitter for Continuous Turbidity Measurement
Turbidity is the measure of relative clarity of the water. It is considered as the simplest and basic indicator of the amount of suspended sediment in the water.
Thermal and Vortex Flowmeter by Comate
Introducing the Vortex and Thermal Mass Flowmeter by COMATE. Exclusive new partnership with COMATE as our authorised agent in Malaysia.
Protect Your Instrument with Panel Enclosure
Overheating moisture and exposure to harsh operating/surrounding environment can shorten the life expectancy of your process instruments.
Level Measurement and Control for Diesel
Diesel fuel is commonly used in various industries to generate and power engines in operation plants. It is normally stored close to where the fuel.
Level Detection for Oil-Water Separator
Improper management and disposal of oil and grease possess hazardous characteristics and affect the public health and environment.
Plastic Valve for Aggressive Medium
Valves control gas and liquid flow in almost every process and system. There are many variables to be taken into consideration when choosing a valve for aggressive medium.
Automation in Industrial Process
Process automation is viewed as inevitable in modern industrial manufacturing. It involves monitoring and controlling field devices, systems, and processes.
Choosing The Right Pressure Sensor
Pressure measurement is the analysis of an applied force by a fluid (liquid or gas) on a surface. Pressure is typically measured in units of force per unit of surface area.
Measuring Level in Aggressive Medium
Harsh operating conditions are part of the challenges faced by the production in the process manufacturing industry.
Choosing the Right Level Sensors
Level measurement is important in the process manufacturing industry. Level measurement sensors are used for point level measurement and continuous level measurement.
Useful Tips For Calibrating Your pH Meter
A calibration of the pH meter will help ensure that the pH measurement is accurate. Calibration can also help identify a problem with the electrode.
Embracing Industry 4.0 with REMOX
The fourth industrial revolution, more commonly known as Industry 4.0, refers to the current trend of improved automation.